rus
Competent opinion
Company Profile
Exhibitions & Conferences
Event of Issue
Report from the Company
Economy & Business
N. Kulchitsky, A. Naumov, V. Startsev
The market of uncooled microbolometers for IR cameras: trends and prospects The main increase in the volume of manufactured thermal imaging infrared systems is associated with civilian use: thermography, security and fire surveillance systems, personal night vision systems and local security markets (municipal, private etc.).
The market of uncooled microbolometers for IR cameras: trends and prospects The main increase in the volume of manufactured thermal imaging infrared systems is associated with civilian use: thermography, security and fire surveillance systems, personal night vision systems and local security markets (municipal, private etc.).
Tags: matrix photodetectors microbolometers thermal imaging devices матричные фотоприемные устройства микроболометры тепловизионные приборы
Electronic Components
M. Makushin, I. Cherepanov
Some aspects of the development of data converter market The article considers the main ADC and DAC market trends and forecasts the volume of sales up to 2023. The demand for data converters is mainly due to the development of IoT, 5G and smartphone markets although they are increasingly being used in military systems, telecommunications and data centers. The article gives a brief description of the main ADC / DAC manufacturers and the parameters of new data converters.
Some aspects of the development of data converter market The article considers the main ADC and DAC market trends and forecasts the volume of sales up to 2023. The demand for data converters is mainly due to the development of IoT, 5G and smartphone markets although they are increasingly being used in military systems, telecommunications and data centers. The article gives a brief description of the main ADC / DAC manufacturers and the parameters of new data converters.
Tags: adc dac fpga microcontrollers soc ацп микроконтроллеры цап
V. Osipov
The use of 1879BYA1YA SoC as a multichannel amplitude analyzer of digital spectrometric path The article proposes the method for building an amplitude analyzer in spectrometric ADC channel based on 1879BYA1YA pipelined ADC SoC. Both the base ADC and the amplitude analyzer was characterized. An estimate of the channel profile and the number of channels of software-based spectrometric ADC based on 1879BYA1YA was made.
The use of 1879BYA1YA SoC as a multichannel amplitude analyzer of digital spectrometric path The article proposes the method for building an amplitude analyzer in spectrometric ADC channel based on 1879BYA1YA pipelined ADC SoC. Both the base ADC and the amplitude analyzer was characterized. An estimate of the channel profile and the number of channels of software-based spectrometric ADC based on 1879BYA1YA was made.
Tags: adc differential nonlinearity (dnl) dsp core dsp-ядро integral nonlinearity (inl) soc ацп дифференциальная нелинейность (dnl) интегральная нелинейность (inl) снк
G. Alekseev, V. Repin, I. Mukhin, M. Drozdetsky
High-frequency 8-bit BiCMOS ADC The two-stage pipelined 8-bit analog-to-digital converter was developed in NIIMA Progress. The proposed architectural solutions allow for high conversion accuracy with relatively low power consumption, which was confirmed by experimental tests at frequencies up to 1 GHz.
High-frequency 8-bit BiCMOS ADC The two-stage pipelined 8-bit analog-to-digital converter was developed in NIIMA Progress. The proposed architectural solutions allow for high conversion accuracy with relatively low power consumption, which was confirmed by experimental tests at frequencies up to 1 GHz.
Tags: 250 nm design rules microwave adc sige bicmos technology sige бикмоп-технология проектные нормы 250 нм свч ацп
V. Ezhov
Analog Devices ADCs & DACs: new products review of 2018 Analog Devices is one of the leading developers and manufacturers of analog-to-digital and digital-to-analog converters. The article presents an overview of new products announced by the company last year, their features, key parameters and promising applications in Russia.
Analog Devices ADCs & DACs: new products review of 2018 Analog Devices is one of the leading developers and manufacturers of analog-to-digital and digital-to-analog converters. The article presents an overview of new products announced by the company last year, their features, key parameters and promising applications in Russia.
Tags: adc analog devices dac pipeline architecture sigma-delta adc successive approximation adc ацп ацп последовательного приближения конвейерная архитектура сигма-дельта ацп цап
V. Ezhov
Murata MEMS sensors: innovative technologies for accurate measurements Last year in November at electronica 2018 Murata presented new solutions in the field of MEMS devices for structural health monitoring, automotive systems and medical devices. The article describes the features of Murata MEMS technology, promising applications and new products offered by the company.
Murata MEMS sensors: innovative technologies for accurate measurements Last year in November at electronica 2018 Murata presented new solutions in the field of MEMS devices for structural health monitoring, automotive systems and medical devices. The article describes the features of Murata MEMS technology, promising applications and new products offered by the company.
Tags: accelerometer gyroscope inclinometer mems sensor murata through-silicon vias (tsv) акселерометр гироскоп инклинометр мэмс-датчик сквозные переходные отверстия
Test & Measurements
Microprocessors and FPGAs
A. Petrov, D. Potekhin, I. Tarasov
FPGA-based systems-on-chip application in production equipment control information systems The article discusses field-programmable gate array (FPGA) features and applicability for production equipment control information systems. It proposes a system architecture where FPGAs serve as an element which perform data collection and pre-processing as well as local control of actuators, thereby implementing the fog computing approach.
FPGA-based systems-on-chip application in production equipment control information systems The article discusses field-programmable gate array (FPGA) features and applicability for production equipment control information systems. It proposes a system architecture where FPGAs serve as an element which perform data collection and pre-processing as well as local control of actuators, thereby implementing the fog computing approach.
Tags: digital signal pre-processing fog computing fpga interface units production control information systems интерфейсные модули информационные системы управления производством плис предварительная цифровая обработка сигналов туманные вычисления
Reliability and tests
M. Makushin, V. Martynov
Automotive ICS reliability: economic and technological aspects Special programs and strategies for quality improvement was developed to ensure the reliability of automotive ICs. Additional requirements are established for deviation monitoring techniques throughout the entire manufacturing process of automotive ICs factory. The new promising defect control methods at the chip level are introduced.
Automotive ICS reliability: economic and technological aspects Special programs and strategies for quality improvement was developed to ensure the reliability of automotive ICs. Additional requirements are established for deviation monitoring techniques throughout the entire manufacturing process of automotive ICs factory. The new promising defect control methods at the chip level are introduced.
Tags: defect golden tool and dog tool programs yield выход годных дефект программы golden tool и dog tool
Power electronics
O. Pchelnikova-Grotova
Design and calculation of autonomous photovoltaic power systems The article proposes a procedure for determining the composition of an autonomous solar power station and calculating the parameters of its units. Information is provided on the technical and operational characteristics of photovoltaic panels and batteries allowing for an analysis of the station’s hardware options to choose a solution that is optimal for the designer’s criteria.
Design and calculation of autonomous photovoltaic power systems The article proposes a procedure for determining the composition of an autonomous solar power station and calculating the parameters of its units. Information is provided on the technical and operational characteristics of photovoltaic panels and batteries allowing for an analysis of the station’s hardware options to choose a solution that is optimal for the designer’s criteria.
Tags: battery calculation of characteristics charge controller inverter photovoltaic panel renewable energy sources solar power system аккумулятор возобновляемые источники энергии инвертор контроллер заряда расчет характеристик солнечная энергетическая установка фотоэлектрическая панель
Production technologies
P. Grigoriev, T. Shimchuk, T. Tsivinskaya
Analysis of technologies of pcb hole direct metallization. Part 2 The article describes the technologies of direct metallization of holes in printed circuit boards based on graphite and polymer systems which have found a more or less wide practical application. Author’s versions of these technologies using domestic materials are proposed. The article analyses advantages and disadvantages of described technologies.
Analysis of technologies of pcb hole direct metallization. Part 2 The article describes the technologies of direct metallization of holes in printed circuit boards based on graphite and polymer systems which have found a more or less wide practical application. Author’s versions of these technologies using domestic materials are proposed. The article analyses advantages and disadvantages of described technologies.
Tags: carbon nanotubes direct metallization graphite systems polymer systems printed circuit boards vias графитовые системы переходные отверстия печатные платы полимерные системы прямая металлизация углеродные нанотрубки
A. Gencelev
Technological quality maintenance on the factory floor The article considers the modern approaches to electronic products quality control in the production process and the equipment used for this. It is noted that the quality control in electronic production is a multifactor problem that requires complex approach.
Technological quality maintenance on the factory floor The article considers the modern approaches to electronic products quality control in the production process and the equipment used for this. It is noted that the quality control in electronic production is a multifactor problem that requires complex approach.