IT IS NEEDED THAT COUNTERFEITING DOMESTIC ORIGIN IS MORE TROUBLE THAN IT’S WORTH DOI: 10.22184/1992-4178.2025.245.4.16.22
DISCUSSION SESSIONS OF EXPOELECTRONICA 2025. PART 1 DOI: 10.22184/1992-4178.2025.245.4.32.35
RESEARCH OF NEURAL NETWORK METHODS FOR CLASSIFICATION OF THE EARTH’S SURFACE DOI: 10.22184/1992-4178.2025.245.4.84.88
The article considers five different convolutional neural network models which were trained and tested. The input data was a set of satellite images RSI-CB256 of the Earth’s surface. The results of the study are applicable in such areas as mapping, urban planning, protection of population and territories from emergency situations.
REVIEW OF SUZHOU HANGJING QUARTZ FREQUENCY CONTROL COMPONENTS DOI: 10.22184/1992-4178.2025.245.4.118.122
Suzhou HangJing Electronic Technology (HCI) is a leader in piezoelectric crystal technology and specializes in design and mass production of quartz crystal signal generation and frequency control components. The article provides an overview of the main categories and key series of components manufactured by the company.
PROSPECTS FOR THE DEVELOPMENT OF DOMESTIC CAD FOR CALCULATING THE MAIN ELECTRICAL PARAMETERS OF FERRITE MICROWAVE DEVICES DOI: 10.22184/1992-4178.2025.245.4.68.71
The article discusses the problems of designing ferrite microwave devices using modern CAD systems and the prospects for developing domestic CAD systems for calculating the main parameters of this class of devices.
«OBZOR» VECTOR NETWORK ANALYZERS: 25 YEARS OF CONTINUOUS DEVELOPMENT DOI: 10.22184/1992-4178.2025.245.4.72.74
The article examines the development stages of «Obzor» vector network analyzers model range and «PLANAR» company future plans in the field of designing devices for measuring the parameters of microwave systems.
PROSPECTS FOR VIRTUALIZATION AND MULTISENSORIZATION OF DOMESTIC DEVICES FOR MEASURING SHAPE DEFECTS DOI: 10.22184/1992-4178.2025.245.4.76.78
The article discusses promising domestic developments of control and measuring equipment designed to measure geometric parameters and control the quality of products. A prototype of a roundness tester is described, implemented on the basis of an adapted optical sensor of a computer mouse.
STUDY OF THE INFLUENCE OF THE ERROR IN SETTING THE ANGLE OF INCLINATION OF THE CONTOUR MEASURING MACHINE DRIVE ON THE RESULT OF FINAL MEASUREMENTS: A VECTOR FOR IMPROVING THE VERIFICATION METHODOLOGY DOI: 10.22184/1992-4178.2025.245.4.80.83
The article studies the influence of the error in setting the angle of inclination of the X-axis drive of the Contracer CV-3100 contour measuring machine on the measurement results. Practical recommendations for adjusting the verification methodology and optimizing the design of the device have been formulated.
METHODOLOGY FOR COMBINING MULTI-ASPECT MODES OF RADAR FRAME FORMATION IN A SPATIALLY DISTRIBUTED SYSTEM OF SMALL-SIZED AIRBORNE RADARS DOI: 10.22184/1992-4178.2025.245.4.90.94
The article proposes the methodology that combines data from multi-aspect modes (bistatic (semi-active) and active) of high-resolution radar frame formation based on a two-position spatially distributed system of small-sized airborne radars.
PROBLEMS OF COMBINED OPERATION OF ONBOARD RADIO INSTRUMENT OF AN AIRBORNE MEASURING STATION BASED ON UAV DOI: 10.22184/1992-4178.2025.245.4.96.100
Airborne measuring stations based on UAVs are used for telemetric control of space launches. Using communication equipment, control data is relayed to a ground station. The article assesses the possibilities of combined operation of onboard equipment.
DOMESTIC GaN MICROWAVE TRANSISTORS WITH A DESIGN SUPPORT KIT FROM «PKK MILANDR» JSC AND AMPLIFIER MODULES BASED ON THEM DOI: 10.22184/1992-4178.2025.245.4.42.43
The article presents a line of powerful GaN microwave transistors of L, S and C frequency ranges with a design support kit developed by «PKK Milandr» JSC, as well as a series of amplifier modules built on the basis of these transistors.
POWER SUPPLY SYSTEM ELECTRONIC COMPONENTS FOR GaN MICROWAVE POWER AMPLIFIERS DOI: 10.22184/1992-4178.2025.245.4.44.48
The article presents the analytical review of foreign-made and home-made electronic components used in the design of GaN microwave power amplifier power supply systems.
DOUBLE-GAP CAPACITIVELY LOADED CAVITY RESONATOR FOR A MULTIBEAM KLYSTRON DOI: 10.22184/1992-4178.2025.245.4.50.58
The article provides the study of electrodynamic and electronic parameters of a capacitively loaded double-gap resonator for a multibeam klystron. The resonator’s design features the mushroom-shaped structure and extra rods along the resonator perimeter. Simulation results were obtained with different sizes of the resonator structure elements.
ON QUANTUM COMPUTERS, RADIO FREQUENCY CABLES AND CONNECTORS. PART 1 DOI: 10.22184/1992-4178.2025.245.4.62.66
The article provides the information on the physical principles of quantum computers. Requirements for radio frequency cables and connectors that are used in quantum computers and support reliable and accurate quantum calculations are formulated.
ALTERNATIVES TO NVIDIA JETSON EMBEDDED COMPUTER MODULES DOI: 10.22184/1992-4178.2025.245.4.112.115
The article examines various architectures of central processors for accelerating work with artificial neural networks. Examples of domestic computing modules and blocks for machine vision systems, video analytics and optical navigation are presented.
INNOVATIVE TECHNOLOGIES FOR RECHARGING BATTERIES OF UNMANNED AERIAL SYSTEMS. PART 1 DOI: 10.22184/1992-4178.2025.245.4.102.108
The article analyzes the engineering solutions that allow increasing the flight time of UAVs, while providing effective and economic methods of recharging.