COMPONENT RELIABILITY IS PROVEN TECHNOLOGY AND TIGHT CONTROL. VISIT TO KULON LLC DOI: 10.22184/1992-4178.2021.204.3.36.44
GOVERNMENT HAS PROVIDED BACKGROUND FOR FORMATION OF DOMESTIC INFRASTRUCTURE FOR RADIO ELECTRONICS PRODUCTS DESIGN DOI: 10.22184/1992-4178.2021.204.3.14.19
FEWER ERRORS, GREATER SAFETY: AUTOMATIC X-RAY INSPECTION ADVANCES ELECTRONIC PARTS MANUFACTURING DOI: 10.22184/1992-4178.2021.204.3.172.174
SELECTION OF EQUIPMENT FOR SOLVING MEASURING TASKS DOI: 10.22184/1992-4178.2021.204.3.176.180
The article considers the measuring systems, which allow to monitor the geometric parameters degree of wear and the validity of the used hand-held measuring instruments and tolerance verification tools.
HIGH-SPEED SOLID STATE MICROWAVE SWITCHES. Part 3 DOI: 10.22184/1992-4178.2021.204.3.108.122
The article considers high-speed solid state microwave switches. Information on various types of transistor switches produced by a number of manufacturers is provided.
TRUSTED ELECTRONIC COMPONENTS FOR TRUSTED HARDWARE AND SOFTWARE PLATFORMS: PROBLEMS AND SOLUTIONS. Part 1 DOI: 10.22184/1992-4178.2021.204.3.98.104
The article considers the main concepts, trends, development features of a relatively new and rapidly developing area of microelectronics – the design of cybersecure electronic components for trusted hardware and software platforms.
OPTIMIZING REFLECTOR ANTENNA MEASUREMENTS DOI: 10.22184/1992-4178.2021.204.3.124.128
The article reviews solutions based on Rohde & Schwarz equipment, which allow optimizing measurements of reflector antennas parameters.
The article considers the processes occurring in the power supply system when the load current changes. Various methods of analyzing such processes using oscilloscopes are described.
PRACTICAL METHOD FOR SEPARATING COMMON-MODE AND DIFFERENTIAL-MODE NOISE IN CONDUCTED EMISSIONS TESTING DOI: 10.22184/1992-4178.2021.204.3.136.139
Knowing where common-mode and differential-mode noise appears in the conducted emissions spectrum allows power supply designers to effectively apply EMI suppression techniques. The article presents a practical method for separating common-mode and differential-mode noise for Analog Devices' LTC7818 switching regulator.
ADVANCED TECHNOLOGIES FOR POWER MODULES AND DEVICES ASSEMBLY DOI: 10.22184/1992-4178.2021.204.3.156.161
The article discusses emerging semiconductor and ceramic materials as well as power semiconductor modules assembly technologies to create products with increased reliability, high electrical and operational characteristics.
RELIABILITY-CENTERED LSI DESIGN METHODS DOI: 10.22184/1992-4178.2021.204.3.46.56
The article discusses the main degradation mechanisms of submicron LSI’s MOS transistors, methods for building models for MOS transistors taking into account aging effects, design flow requirements for highly reliable CMOS LSI and reliability-centered design tools, implemented in the most widely used CAD systems.
ASIPs AND WAYS OF VERIFICATION THEM DOI: 10.22184/1992-4178.2021.204.3.58.65
The article describes the major advantages of using instruments of Synopsys’s ASIP Designer platform for application-specific instruction-set processors (ASIPs) design, and discusses in detail the resulting processor verification approaches: functional model verification, software testing and profiling as well as RTL verification.
STATE-OF-THE-ART SOLUTIONS FOR SIMULATING AND DESIGNING MEMS IN CoventorMP ENVIRONMENT DOI: 10.22184/1992-4178.2021.204.3.66.71
CoventorMP dedicated development platform allows you to efficiently design, optimize and integrate MEMS devices. The article considers the main functionality, system capabilities, as well as the features of MEMS+ and CoventorWare tools that are part of CoventorMP.
DELTA DESIGN IS MODERN DOMESTIC ELECTRONIC END-TO-END CYCLE CAD DOI: 10.22184/1992-4178.2021.204.3.72.78
EREMEX has developed Delta Design CAD system that meets the current requirements of electronics developers and implements an end-to-end product design cycle with the support of Russian GOSTs. The article discusses the main functionality and capabilities of this CAD system.
DEVELOPMENT OF DOMESTIC PASSIVE ELECTRONIC COMPONENTS MODELS AND THEIR INTEGRATION INTO COMPUTER-AIDED DESIGN SYSTEMS DOI: 10.22184/1992-4178.2021.204.3.80.86
The article discusses the methodology for building models of electronic components by the example of creating models of microwave chip inductors and chip resistors from NPO ERKON JSC in Delta Design 3.0 CAD system.
EDUCATIONAL ROBOTICS: PROJECT LEARNING IN DIGITAL MANUFACTURING. Part 2 DOI: 10.22184/1992-4178.2021.204.3.182.194
In the second part of the article we continue to consider examples of the development of mobile robots for competitions and compare robots of different years. The technological base for training projects of educational robotics is also discussed.
PKK MILANDR JSC MICROCONTROLLER BASED ON RISC-V PROCESSOR CORE FOR ELECTRICITY METERS DOI: 10.22184/1992-4178.2021.204.3.92.96
The article reviews PKK Milandr JSC К1986ВК025 microcontroller based on RISC-V processor core. The information on the characteristics and functionality of this microcontroller is provided.
INCREASING THE OBJECT DETECTION RANGE OF LIDAR USING TRACKING DOI: 10.22184/1992-4178.2021.204.3.88.91
The most important parameter of lidar is the detection range, on which the safety of the vehicle depends. The article describes an effective method for improving the lidar characteristics, which improves the quality of object detection and system reliability.
MULTI-CHANNEL HIGH VOLTAGE DRIVER ICs DOI: 10.22184/1992-4178.2021.204.3.140.144
The article presents multi-channel high voltage driver IC set. A brief description of the functional structure and circuitry, the design and technological solution as well as the key electrical characteristics are given.
QAExxU-K SERIES DC/DC CONVERTERS WITH ENHANCED HOLD-UP OPTION DOI: 10.22184/1992-4178.2021.204.3.146.150
QAExxU-K series DC/DC converters with enhanced hold-up option from P-DUKE Technology provide a complete integrated solution for any power system.
PROGRAMMABLE LEAD ACID AND LITHIUM BATTERY CHARGER DOI: 10.22184/1992-4178.2021.204.3.152.154
The article considers the most popular types of batteries: lead-acid and lithium, their properties and differences as well as some recommendations are given on how to choose a charger in order to solve many technical application tasks.
TO ENSURE TECHNOLOGICAL INDEPENDENCE THE COUNTRY NEEDS A MASS CONSUMER OF PRINTED CIRCUIT BOARDS DOI: 10.22184/1992-4178.2021.204.3.162.164
The article discusses TECHNOTECH LLC experience in the development of technology for the production of basic materials for printed circuit boards. The problems of domestic PCB manufacturers are considered, a solution is proposed that creates conditions for sustainable development of the industry.
YAMAHA'S COMPLETE SOLUTION FOR SMD MOUNTING – YAMAHA TOTAL LINE SOLUTION DOI: 10.22184/1992-4178.2021.204.3.166.170
Yamaha solutions due to its flexibility and performance provide a wide range of customer needs from mass production of simple products with a narrow range of components to highly complex one-off prod-ucts.