rus
Adress to readers
Competent opinion
S. Rybakov
EFFICIENCY IMPROVEMENT IS A PERMANENT PROCESS DOI: 10.22184/1992-4178.2026.257.5.16.24
EFFICIENCY IMPROVEMENT IS A PERMANENT PROCESS DOI: 10.22184/1992-4178.2026.257.5.16.24
Column of radio-electronic industry department
Report from a company
Yu. Kovalevsky
MANUFACTURING OF RUSSIAN SURGE PROTECTIVE PRODUCTS: FROM VARISTOR TO SPD. VISIT TO THE PRODUCTION FACILITY OF HAKEL JSC (BRAND “КЛЮЧЕВОЙ КОМПОНЕНТ”) DOI: 10.22184/1992-4178.2026.257.5.38.48
MANUFACTURING OF RUSSIAN SURGE PROTECTIVE PRODUCTS: FROM VARISTOR TO SPD. VISIT TO THE PRODUCTION FACILITY OF HAKEL JSC (BRAND “КЛЮЧЕВОЙ КОМПОНЕНТ”) DOI: 10.22184/1992-4178.2026.257.5.38.48
Company Profile
S. Kuzin
ZAVOD KOPIR JSC: 60 YEARS – FROM FIRST CONTACT TO A MILLION CONNECTIONS IN SPACE AND AUTOMOTIVE INDUSTRY DOI: 10.22184/1992-4178.2026.257.5.50.51
ZAVOD KOPIR JSC: 60 YEARS – FROM FIRST CONTACT TO A MILLION CONNECTIONS IN SPACE AND AUTOMOTIVE INDUSTRY DOI: 10.22184/1992-4178.2026.257.5.50.51
A. Murygin
ZAVOD METEOR JSC IS BUILDING ITS FUTURE BY DEVELOPING ITS OWN TECHNOLOGIES AND INCREASING ITS HUMAN CAPITAL DOI: 10.22184/1992-4178.2026.257.5.52.54
ZAVOD METEOR JSC IS BUILDING ITS FUTURE BY DEVELOPING ITS OWN TECHNOLOGIES AND INCREASING ITS HUMAN CAPITAL DOI: 10.22184/1992-4178.2026.257.5.52.54
Industry Events
V. Korshuk
SCIENTIFIC AND TECHNICAL PROBLEMS IN THE DEVELOPMENT AND PRODUCTION OF PASSIVE ELECTRONIC COMPONENTS INAUGURAL MEETING OF SECTION No. 14 “PASSIVE ELECTRONIC COMPONENTS” OF THE RUSSIAN FORUM “MICROELECTRONICS” DOI: 10.22184/1992-4178.2026.257.5.32.36
SCIENTIFIC AND TECHNICAL PROBLEMS IN THE DEVELOPMENT AND PRODUCTION OF PASSIVE ELECTRONIC COMPONENTS INAUGURAL MEETING OF SECTION No. 14 “PASSIVE ELECTRONIC COMPONENTS” OF THE RUSSIAN FORUM “MICROELECTRONICS” DOI: 10.22184/1992-4178.2026.257.5.32.36
NEWS
Economy & Business
P. Vernik, V. Korshuk
ENSURING TECHNOLOGICAL SAFETY IN THE PRODUCTION OF CIVILIAN ELECTRONIC EQUIPMENT DOI: 10.22184/1992-4178.2026.257.5.62.66
The article presents the results of an analysis of passive electronic component production in Russia in recent years. It examines the forecast indicators for the electronics industry in terms of passive electronic component production, discusses key scientific, technical and economic challenges facing the industry and explores possible solutions.
ENSURING TECHNOLOGICAL SAFETY IN THE PRODUCTION OF CIVILIAN ELECTRONIC EQUIPMENT DOI: 10.22184/1992-4178.2026.257.5.62.66
The article presents the results of an analysis of passive electronic component production in Russia in recent years. It examines the forecast indicators for the electronics industry in terms of passive electronic component production, discusses key scientific, technical and economic challenges facing the industry and explores possible solutions.
Tags: end-to-end planning forecast indicators government support for the electronics industry passive components государственная поддержка электронной отрасли пассивные компоненты прогнозные показатели сквозное планирование
V.V. Enns
SOME ASPECTS OF DOMESTIC MICROELECTRONICS DEVELOPMENT. PROBLEMS, TASKS, SOLUTIONS The article examines the possible development options for domestic microelectronics in the current environment. Issues analyzed include personnel policy, lack of sales markets, bureaucratic barriers and chip manufacturing. Recommendations for industry development are formulated, and solutions for organizing work in the field of critical systems development are proposed.
SOME ASPECTS OF DOMESTIC MICROELECTRONICS DEVELOPMENT. PROBLEMS, TASKS, SOLUTIONS The article examines the possible development options for domestic microelectronics in the current environment. Issues analyzed include personnel policy, lack of sales markets, bureaucratic barriers and chip manufacturing. Recommendations for industry development are formulated, and solutions for organizing work in the field of critical systems development are proposed.
Components
M. Sokolov
HONGDA CAPACITORS IS A MANUFACTURER OF HIGH-QUALITY PASSIVE COMPONENTS DOI: 10.22184/1992-4178.2026.257.5.56.61
Hongda Capacitors is a leading Chinese manufacturer of passive components, specializing in tantalum, polymer and chip capacitors, as well as inductors and resistors.
The article provides an overview of Hongda Capacitors’ main product categories and key applications for these components.
HONGDA CAPACITORS IS A MANUFACTURER OF HIGH-QUALITY PASSIVE COMPONENTS DOI: 10.22184/1992-4178.2026.257.5.56.61
Hongda Capacitors is a leading Chinese manufacturer of passive components, specializing in tantalum, polymer and chip capacitors, as well as inductors and resistors.
The article provides an overview of Hongda Capacitors’ main product categories and key applications for these components.
Tags: inductor multilayer ceramic chip capacitor passive components polymer capacitor tantalum chip capacitor катушка индуктивности многослойный керамический чип-конденсатор пассивные компоненты полимерный конденсатор танталовый чип-конденсатор
Data Collection, Processing and Communication Systems
A. Golubkov, S. Melyukov, A. Fomichev
ADAPTIVE VISUAL-INERTIAL DATA FUSION ALGORITHM FOR AUTONOMOUS QUADCOPTER LANDING ON A MOVING PLATFORM DOI: 10.22184/1992-4178.2026.257.5.136.144
The article presents an adaptive data fusion algorithm
for autonomous quadcopter landing on a moving platform.
The key features of the developed approach include dynamic correction of the measurement covariance matrix; explicit compensation for video stream latency by introducing a predictive corrector and a formal justification for the stability of the Extended Kalman Filter with variable weight coefficients.
ADAPTIVE VISUAL-INERTIAL DATA FUSION ALGORITHM FOR AUTONOMOUS QUADCOPTER LANDING ON A MOVING PLATFORM DOI: 10.22184/1992-4178.2026.257.5.136.144
The article presents an adaptive data fusion algorithm
for autonomous quadcopter landing on a moving platform.
The key features of the developed approach include dynamic correction of the measurement covariance matrix; explicit compensation for video stream latency by introducing a predictive corrector and a formal justification for the stability of the Extended Kalman Filter with variable weight coefficients.
Tags: adaptive covariance aruco marker aruco-маркер data fusion extended kalman filter latency compensation quadcopter visual feedback адаптивная ковариация визуальная обратная связь квадрокоптер компенсация запаздывания комплексирование данных расширенный фильтр калмана
M. Makushin
STATUS OF 6G NETWORK DEVELOPMENT IN LEADING COUNTRIES. PART 2 The article examines the technological aspects of 5G and 6G network development and the challenges of their implementation.
It also discusses the status of 6G development in China, Japan,
South Korea, India, EU and the US.
STATUS OF 6G NETWORK DEVELOPMENT IN LEADING COUNTRIES. PART 2 The article examines the technological aspects of 5G and 6G network development and the challenges of their implementation.
It also discusses the status of 6G development in China, Japan,
South Korea, India, EU and the US.
Tags: 5g and 6g networks 5g- и 6g-сети ai deployment iot robots standards technology uavs бпла ии развертывание роботы стандарты технология
Test & Measurements
A. Roslyakov
CUSTOMIZED APPROACH TO HARNESS TESTING AS THE KEY TO EFFICIENCY DOI: 10.22184/1992-4178.2026.257.5.94.96
Using STC-1500 system from Sovtest ATE LLC as an example
the article examines how the development of integrated solutions allows for not just quality control but also transforms testing into a high-speed production process, while ensuring stability
and eliminating false defects.
CUSTOMIZED APPROACH TO HARNESS TESTING AS THE KEY TO EFFICIENCY DOI: 10.22184/1992-4178.2026.257.5.94.96
Using STC-1500 system from Sovtest ATE LLC as an example
the article examines how the development of integrated solutions allows for not just quality control but also transforms testing into a high-speed production process, while ensuring stability
and eliminating false defects.
Tags: circuit integrity harnesses insulation strength short circuits testing жгуты короткие замыкания прочность изоляции тестирование целостность цепей
A. Bobryshov
MODEL AND CRITERIA FOR ASSESSING THE PROBABILITY OF ELECTRICAL MEASURING INSTRUMENTS’ SUITABILITY BASED ON DIAGNOSTIC RESULTS DOI: 10.22184/1992-4178.2026.257.5.98.104
The article analyzes approaches to assessing the technical condition of a measuring device by calculating the average reduced measurement error of the device. It presents the form for assessing the technical condition of an instruments based on operational verification characteristics and the results of the decision to recognize the device as suitable.
MODEL AND CRITERIA FOR ASSESSING THE PROBABILITY OF ELECTRICAL MEASURING INSTRUMENTS’ SUITABILITY BASED ON DIAGNOSTIC RESULTS DOI: 10.22184/1992-4178.2026.257.5.98.104
The article analyzes approaches to assessing the technical condition of a measuring device by calculating the average reduced measurement error of the device. It presents the form for assessing the technical condition of an instruments based on operational verification characteristics and the results of the decision to recognize the device as suitable.
Tags: математическая модель области вероятности пригодности паспортная точность погрешность измерений
P. Rudnev, I. Cheshigin, N. Moiseev, A. Tsovyanov
OVERCOMING THE FUNDAMENTAL LIMITATIONS OF INTEGRATED DOSIMETERS: NEUTRON AND GAMMA-QUANTUM SPECTROMETER-DOSIMETER DOI: 10.22184/1992-4178.2026.257.5.108.118
The article analyzes the fundamental limitations of the integrated dosimetry method, which stem not from the quality of specific instruments, but from the measurement approach itself.
As an alternative, a direct spectrometric method is proposed, implemented in the SDMF-1608SN spectrometer-dosimeter.
OVERCOMING THE FUNDAMENTAL LIMITATIONS OF INTEGRATED DOSIMETERS: NEUTRON AND GAMMA-QUANTUM SPECTROMETER-DOSIMETER DOI: 10.22184/1992-4178.2026.257.5.108.118
The article analyzes the fundamental limitations of the integrated dosimetry method, which stem not from the quality of specific instruments, but from the measurement approach itself.
As an alternative, a direct spectrometric method is proposed, implemented in the SDMF-1608SN spectrometer-dosimeter.
Tags: ambient dose equivalent energy spectrum integral dosimetry mixed neutron-gamma radiation spectrometric method амбиентный эквивалент дозы интегральная дозиметрия смешанное нейтрон-гамма- излучение спектрометрический метод энергетический спектр
K. Epifantsev
MATHEMATICAL ALGORITHMS FOR METROLOGICAL SUPPORT OF MULTISENSOR INSTRUMENTS DOI: 10.22184/1992-4178.2026.257.5.120.124
Multi-sensor instruments offer extensive functional capabilities due to the integration of multiple sensors within a single housing.
The article considers the problem of determining the accuracy class for such measuring instruments, which feature multiple scales and measurement channels.
MATHEMATICAL ALGORITHMS FOR METROLOGICAL SUPPORT OF MULTISENSOR INSTRUMENTS DOI: 10.22184/1992-4178.2026.257.5.120.124
Multi-sensor instruments offer extensive functional capabilities due to the integration of multiple sensors within a single housing.
The article considers the problem of determining the accuracy class for such measuring instruments, which feature multiple scales and measurement channels.
Tags: accuracy class multisensor instrument scale standardization класс точности мультисенсорный прибор стандартизация шкала
Microwave electronics
V. Kochemasov, T. Kosichkina
GaN TRANSISTORS. PART 2 DOI: 10.22184/1992-4178.2026.257.5.126.134
The article considers the characteristics and features of high electron mobility transistors based
on gallium nitride. Information on transistors from domestic and foreign manufacturers designed
for use in microwave power amplifiers is provided.
GaN TRANSISTORS. PART 2 DOI: 10.22184/1992-4178.2026.257.5.126.134
The article considers the characteristics and features of high electron mobility transistors based
on gallium nitride. Information on transistors from domestic and foreign manufacturers designed
for use in microwave power amplifiers is provided.
Tags: нитрид галлия свч-устройства транзисторы с высокой подвижностью электронов усилители мощности широкая запрещенная зона
for Engineers
Production technologies
M. Titov, A. Bush, A. Spitsin, D. Fedulov, K. Kamentsev, A. Khramtsov
APPLICATION OF CAM-M1A CASTING MACHINE FOR PRODUCING POLYMER AND COMPOSITE FILMS BASED ON VINYLIDENE FLUORIDE-TETRAFLUOROETHYLENE DOI: 10.22184/1992-4178.2026.257.5.72.80
The article describes a technology for producing polymer and composite films based on vinylidene fluoride-tetrafluoroethylene using slip casting on KEKO Equipment CAM-M1A casting machine. The resulting films were subjected to X-ray, thermogravimetric and dielectric studies, thermally stimulated depolarization
currents were tested.
APPLICATION OF CAM-M1A CASTING MACHINE FOR PRODUCING POLYMER AND COMPOSITE FILMS BASED ON VINYLIDENE FLUORIDE-TETRAFLUOROETHYLENE DOI: 10.22184/1992-4178.2026.257.5.72.80
The article describes a technology for producing polymer and composite films based on vinylidene fluoride-tetrafluoroethylene using slip casting on KEKO Equipment CAM-M1A casting machine. The resulting films were subjected to X-ray, thermogravimetric and dielectric studies, thermally stimulated depolarization
currents were tested.
Tags: casting machine composites polymer films thermogravimetric analysis vinylidene fluoride-tetrafluoroethylene copolymers x-ray phase analysis композиты литейная машина полимерные пленки рентгеновский фазовый анализ сополимеры винилиденфторида с тетрафторэтиленом термогравиметрический анализ
A. Sobolev
DIAGNOSTICS AND ZERO-DIMENSIONAL SIMULATION OF CF4+O2+Ar PLASMA IN A REACTIVE ION ETCHING REACTOR DOI: 10.22184/1992-4178.2026.257.5.82.86
Mathematical simulation of plasma can be used to optimize reactive ion etching processes without the need for numerous costly experiments. The article presents a method for mathematical simulation of plasma-chemical processes based
on a zero-dimensional global model combined
with plasma probe diagnostics.
DIAGNOSTICS AND ZERO-DIMENSIONAL SIMULATION OF CF4+O2+Ar PLASMA IN A REACTIVE ION ETCHING REACTOR DOI: 10.22184/1992-4178.2026.257.5.82.86
Mathematical simulation of plasma can be used to optimize reactive ion etching processes without the need for numerous costly experiments. The article presents a method for mathematical simulation of plasma-chemical processes based
on a zero-dimensional global model combined
with plasma probe diagnostics.
Tags: langmuir double probe low-temperature gas-discharge plasma reactive ion etching zero-dimensional plasma simulation двойной зонд лангмюра низкотемпературная газоразрядная плазма нуль-мерное моделирование плазмы реактивно-ионное травление
Micro and nanostructures
D. Sukhanov
GRAPHENE AS A MEANS TO EXTEND MOORE’S LAW DOI: 10.22184/1992-4178.2026.257.5.88.92
Graphene is a zero-bandgap semimetal with unique electrical, optical, and mechanical properties. The article examines the potential and prospects for its application in BEOL technologies.
GRAPHENE AS A MEANS TO EXTEND MOORE’S LAW DOI: 10.22184/1992-4178.2026.257.5.88.92
Graphene is a zero-bandgap semimetal with unique electrical, optical, and mechanical properties. The article examines the potential and prospects for its application in BEOL technologies.