rus
Competent opinion
D. Semyonov
WE COME TO THE CUSTOMERS NOT WITH A COMPONENT, BUT WITH A SOLUTION TO THEIR PROBLEM DOI: 10.22184/1992-4178.2023.224.3.14.20
WE COME TO THE CUSTOMERS NOT WITH A COMPONENT, BUT WITH A SOLUTION TO THEIR PROBLEM DOI: 10.22184/1992-4178.2023.224.3.14.20
F. Helmi
WE WANT TO BECOME A COMPANY THE RUSSIAN CUSTOMERS TRUST THE MOST DOI: 10.22184/1992-4178.2023.224.3.22.26
WE WANT TO BECOME A COMPANY THE RUSSIAN CUSTOMERS TRUST THE MOST DOI: 10.22184/1992-4178.2023.224.3.22.26
A. Sizikov
THERE IS VERY GOOD PROSPECT FOR COMPONENTS PRODUCERS, AND WE MUST USE THIS OPPORTUNITY DOI: 10.22184/1992-4178.2023.224.3.28.32
THERE IS VERY GOOD PROSPECT FOR COMPONENTS PRODUCERS, AND WE MUST USE THIS OPPORTUNITY DOI: 10.22184/1992-4178.2023.224.3.28.32
Yu. Myakochin
OUR GOAL IS TO EXPAND THE RANGE OF DOMESTIC PRODUCTS AND INCREASE MARKET SHARE DOI: 10.22184/1992-4178.2023.224.3.34.36
OUR GOAL IS TO EXPAND THE RANGE OF DOMESTIC PRODUCTS AND INCREASE MARKET SHARE DOI: 10.22184/1992-4178.2023.224.3.34.36
Column of radio-electronic industry department
Report from a company
Yu. Kovalevsky
A COMPREHENSIVE SOLUTION FOR MATERIALS MIXING AND DISPENSING. VISIT TO “WELTPLAST” AND NTF “TECHNO-ALIJANS ELEKTRONIKS” DOI: 10.22184/1992-4178.2023.224.3.66.74
A COMPREHENSIVE SOLUTION FOR MATERIALS MIXING AND DISPENSING. VISIT TO “WELTPLAST” AND NTF “TECHNO-ALIJANS ELEKTRONIKS” DOI: 10.22184/1992-4178.2023.224.3.66.74
Company Profile
V. Paevsky
X ELECTRONICS IS OPEN TO CONSTRUCTIVE AND MUTUALLY BENEFICIAL COOPERATION DOI: 10.22184/1992-4178.2023.224.3.76.77
X ELECTRONICS IS OPEN TO CONSTRUCTIVE AND MUTUALLY BENEFICIAL COOPERATION DOI: 10.22184/1992-4178.2023.224.3.76.77
Rules and Regulations
Yu. Kovalevsky
ENHANCEMENT OF LEGISLATION FOR CONTRACT SYSTEM AND PROCUREMENT PROCEDURES DOI: 10.22184/1992-4178.2023.224.3.60.64
MEETING OF THE MILITARY AND INDUSTRIAL POLICY AND BUDGET SECTION OF THE EXPERT COUNCIL OF THE FEDERATION COUNCIL COMMITTEE ON DEFENSE AND SECURITY
ENHANCEMENT OF LEGISLATION FOR CONTRACT SYSTEM AND PROCUREMENT PROCEDURES DOI: 10.22184/1992-4178.2023.224.3.60.64
MEETING OF THE MILITARY AND INDUSTRIAL POLICY AND BUDGET SECTION OF THE EXPERT COUNCIL OF THE FEDERATION COUNCIL COMMITTEE ON DEFENSE AND SECURITY
NEWS
Economy & Business
M. Makushin
MICROELECTRONICS: DEVELOPMENT OF THE PRODUCTION FACILITIES, SALES OF EQUIPMENT AND EUV LITHOGRAPHY DOI: 10.22184/1992-4178.2023.224.3.116.129
The expansion of the use of ICs and other semiconductor devices, both in their traditional areas and in new areas, leads to an expansion of the production base and an increase in the purchase of equipment for production using advanced processes with minimum design rules.
MICROELECTRONICS: DEVELOPMENT OF THE PRODUCTION FACILITIES, SALES OF EQUIPMENT AND EUV LITHOGRAPHY DOI: 10.22184/1992-4178.2023.224.3.116.129
The expansion of the use of ICs and other semiconductor devices, both in their traditional areas and in new areas, leads to an expansion of the production base and an increase in the purchase of equipment for production using advanced processes with minimum design rules.
D. Novotorzhentsev
EXPERIENCE PRACTICE WITH CHINESE COMPONENT SUPPLIERS: HOW TO AVOID RISKS DOI: 10.22184/1992-4178.2023.224.3.130.132
Using the example of cooperation between Expert Group of Companies and Chinese companies, the article discusses the specifics of working with component suppliers and printed circuit board manufacturers from China.
EXPERIENCE PRACTICE WITH CHINESE COMPONENT SUPPLIERS: HOW TO AVOID RISKS DOI: 10.22184/1992-4178.2023.224.3.130.132
Using the example of cooperation between Expert Group of Companies and Chinese companies, the article discusses the specifics of working with component suppliers and printed circuit board manufacturers from China.
Tags: component supplier logistics printed circuit board sanctions логистика печатная плата поставщик компонентов санкции
Manufacturing equipment and process materials
I. Rozhkov, A. Garanin, D. Podolsky
REMEMBERING THE FUTURE: PARTS WAREHOUSE AUTOMATION DOI: 10.22184/1992-4178.2023.224.3.84.90
Using the example of cooperation between New Technologies LLC and the Chinese company Neotel Technology, the article discusses the key principles of building a warehouse accounting system at a manufacturing enterprise, modern technologies, equipment and solutions for integrated warehouse automation.
REMEMBERING THE FUTURE: PARTS WAREHOUSE AUTOMATION DOI: 10.22184/1992-4178.2023.224.3.84.90
Using the example of cooperation between New Technologies LLC and the Chinese company Neotel Technology, the article discusses the key principles of building a warehouse accounting system at a manufacturing enterprise, modern technologies, equipment and solutions for integrated warehouse automation.
Tags: automatic guided vehicle component counting system component tagging integrated warehouse automation storageretrieval system warehouse accounting system wms-system wms-система автоматически управляемые тележки комплексная автоматизация склада маркировка компонентов система подсчета компонентов система складского учета транспортно-складская система
L. Chuikova
TIME-PROVED EQUIPMENT: HOW TO PROPERLY STORE MATERIALS AND COMPONENTS DOI: 10.22184/1992-4178.2023.224.3.92.96
The article describes the requirements of international and Russian standards for the storage of materials and components. The features and advantages of dry storage cabinets from Sovtest ATE LLC are considered.
TIME-PROVED EQUIPMENT: HOW TO PROPERLY STORE MATERIALS AND COMPONENTS DOI: 10.22184/1992-4178.2023.224.3.92.96
The article describes the requirements of international and Russian standards for the storage of materials and components. The features and advantages of dry storage cabinets from Sovtest ATE LLC are considered.
Tags: climatic conditions dry storage cabinet dust / damp-proof design international standards requirements moisture-sensitive components влагочувствительные компоненты климатические условия пыле-/влагонепроницаемая конструкция требования международных стандартов шкаф сухого хранения
V. Kovensky, D. Poceluev
ZESTRON HAS GONE… HYDRONOL WILL CONTINUE WORKING! DOI: 10.22184/1992-4178.2023.224.3.98.104
The article reviews the Hydronol washing liquids. It is noted that this is a valid replacement for liquids from Zestron, Vigon and other world brands, not inferior to them in terms of its technical and operational characteristics.
ZESTRON HAS GONE… HYDRONOL WILL CONTINUE WORKING! DOI: 10.22184/1992-4178.2023.224.3.98.104
The article reviews the Hydronol washing liquids. It is noted that this is a valid replacement for liquids from Zestron, Vigon and other world brands, not inferior to them in terms of its technical and operational characteristics.
Electronic Components
I. Chikvarkin
NAVIGATION AND TELEMATICS MODULE LINE. LTE WIRELESS MODULES DOI: 10.22184/1992-4178.2023.224.3.156.159
NIIMA Progress JSC develops modules of the LTE standard based on domestic components for mass navigation and communication equipment. The article reviews the general characteristics, appearance and overall dimensions of the modules, as well as the results obtained at the development stage.
NAVIGATION AND TELEMATICS MODULE LINE. LTE WIRELESS MODULES DOI: 10.22184/1992-4178.2023.224.3.156.159
NIIMA Progress JSC develops modules of the LTE standard based on domestic components for mass navigation and communication equipment. The article reviews the general characteristics, appearance and overall dimensions of the modules, as well as the results obtained at the development stage.
Tags: 2g / 4g networks 4g lte (cat. 1) 4g lte (cat. 4) 4g lte (cat. 4) modules модули 4g lte (cat. 1) сети 2g / 4g
CAD
A. Strogonov
DESIGNING FINITE-STATE MACHINE IN MATLAB / SIMULINK SYSTEM’S STATEFLOW TOOL WITH SUBSEQUENT IMPLEMENTATION AT THE FPGA BASIS DOI: 10.22184/1992-4178.2023.224.3.134.146
The article describes an example of designing finite-state machine in Stateflow tool of Matlab/Simulink visual simulation system with subsequent HDL code generation.
DESIGNING FINITE-STATE MACHINE IN MATLAB / SIMULINK SYSTEM’S STATEFLOW TOOL WITH SUBSEQUENT IMPLEMENTATION AT THE FPGA BASIS DOI: 10.22184/1992-4178.2023.224.3.134.146
The article describes an example of designing finite-state machine in Stateflow tool of Matlab/Simulink visual simulation system with subsequent HDL code generation.
Tags: finite-state machine fpga matlab/simulink mealy machine moore machine ohe method risc-v architecture stateflow diagram stateflow-диаграмма автомат мили автомат мура архитектура risc-v конечный автомат метод ohe плис
Test & Measurements
A. Timonovich
SK4-MAX6 SIGNAL AND SPECTRUM ANALYZER – MADE IN RUSSIA DOI: 10.22184/1992-4178.2023.224.3.148.152
PK Novel JSC has launched serial production of SK4-MAX6 high-class real-time signal and spectrum analyzer. In terms of the combination of metrological and technical characteristics, this device is comparable to the best foreign products.
SK4-MAX6 SIGNAL AND SPECTRUM ANALYZER – MADE IN RUSSIA DOI: 10.22184/1992-4178.2023.224.3.148.152
PK Novel JSC has launched serial production of SK4-MAX6 high-class real-time signal and spectrum analyzer. In terms of the combination of metrological and technical characteristics, this device is comparable to the best foreign products.
Tags: channel power measurement dynamic range interface radio path signal and spectrum analyzer анализатор сигналов и спектра динамический диапазон измерение мощности в канале интерфейс радиотракт
Microwave electronics
K. Djurinsky
HISTORY OF RF CONNECTORS. INSTRUMENT AND METROLOGY CONNECTORS DOI: 10.22184/1992-4178.2023.224.3.166.174
The article presents the main requirements for instrumental and metrological RF connectors. The features of unipolar connectors are considered in detail. The main production stages and parameters of cm- and mm-wave connectors are analyzed.
HISTORY OF RF CONNECTORS. INSTRUMENT AND METROLOGY CONNECTORS DOI: 10.22184/1992-4178.2023.224.3.166.174
The article presents the main requirements for instrumental and metrological RF connectors. The features of unipolar connectors are considered in detail. The main production stages and parameters of cm- and mm-wave connectors are analyzed.
Tags: 1.0 mm) 1.85 mm 2.4 mm gr874 and gr900 unipolar connectors gr900 mm-range connectors (2.92 mm соединители мм-диапазона (2.92 mm униполярные соединители gr874
Displays
A. Pavlenko
Si-OLED MICRODISPLAYS FROM TOP DISPLAY OPTOELECTRONICS DOI: 10.22184/1992-4178.2023.224.3.162.164
The main advantage of microdisplays is the ability to expose a full-size image in microformat without quality loss. This requirement is relevant for ocular and projection optical systems of various types: viewfinders; sights; night vision devices; VR glasses; pico projectors; microsurgical equipment, etc.
Si-OLED MICRODISPLAYS FROM TOP DISPLAY OPTOELECTRONICS DOI: 10.22184/1992-4178.2023.224.3.162.164
The main advantage of microdisplays is the ability to expose a full-size image in microformat without quality loss. This requirement is relevant for ocular and projection optical systems of various types: viewfinders; sights; night vision devices; VR glasses; pico projectors; microsurgical equipment, etc.
Power electronics
A. Vorontsov, Yu. Libenko, A. Chetin
REAL OPPORTUNITIES FOR IMPORT SUBSTITUTION OF POWER ELECTRONICS DOI: 10.22184/1992-4178.2023.224.3.178.187
NTC AKTOR LLC offers a wide range of power electronics devices that are not inferior in their characteristics to many foreign analogues. The article considers the opportunities for import substitution by the example of some types of power electronics manufactured by the enterprise.
REAL OPPORTUNITIES FOR IMPORT SUBSTITUTION OF POWER ELECTRONICS DOI: 10.22184/1992-4178.2023.224.3.178.187
NTC AKTOR LLC offers a wide range of power electronics devices that are not inferior in their characteristics to many foreign analogues. The article considers the opportunities for import substitution by the example of some types of power electronics manufactured by the enterprise.
Tags: airfield power supply complex of simulation hardware electric load simulator power quality indicators power supply аэродромный источник питания имитатор электрической нагрузки источник питания комплекс имитационных технических средств показатели качества электроэнергии
I. Malyshev, Yu. Eremeev, E. Mozulyakina
R1-150M POWER RESISTORS AND HP1-82 RESISTOR SETS FOR USE IN POWER ELECTRONIC MODULES DOI: 10.22184/1992-4178.2023.224.3.188.192
The article describes the new domestic developments in the field of high-voltage power resistors, the main technical parameters of such products are given.
R1-150M POWER RESISTORS AND HP1-82 RESISTOR SETS FOR USE IN POWER ELECTRONIC MODULES DOI: 10.22184/1992-4178.2023.224.3.188.192
The article describes the new domestic developments in the field of high-voltage power resistors, the main technical parameters of such products are given.
for Engineers
Digital manufacturing
Yu. Rogozina, E. Kuznetsova
HOW TO DEFEAT THE DRAGON: IMPLEMENTATION OF 1C:ERP IN THE CONTRACT MANUFACTURING OF ELECTRONICS USING THE AGILE METHODOLOGY DOI: 10.22184/1992-4178.2023.224.3.78.82
When implementing an automated accounting system at a particular enterprise, many factors should be taken into account that affect the timing of the project and the final result. The article describes the experience of implementing the 1C:ERP system in MicroEM Technologies.
HOW TO DEFEAT THE DRAGON: IMPLEMENTATION OF 1C:ERP IN THE CONTRACT MANUFACTURING OF ELECTRONICS USING THE AGILE METHODOLOGY DOI: 10.22184/1992-4178.2023.224.3.78.82
When implementing an automated accounting system at a particular enterprise, many factors should be taken into account that affect the timing of the project and the final result. The article describes the experience of implementing the 1C:ERP system in MicroEM Technologies.
Tags: agile methodology automated accounting system business processes erp system erp-система автоматизированная система учета бизнес-процессы методология agile
Production technologies
A. Polyanin, Sh. Shugaepov, E. Ermolaev, V. Egoshin
EQUIPMENT AND MATERIALS FOR THE MANUFACTURE OF METAL PARTS AT ZPP JSC DOI: 10.22184/1992-4178.2023.224.3.106.108
The article considers the equipment and materials used in Plant of Semiconductor Devices JSC (ZPP JSC) for the manufacture of various metal parts for metal-ceramic packages.
EQUIPMENT AND MATERIALS FOR THE MANUFACTURE OF METAL PARTS AT ZPP JSC DOI: 10.22184/1992-4178.2023.224.3.106.108
The article considers the equipment and materials used in Plant of Semiconductor Devices JSC (ZPP JSC) for the manufacture of various metal parts for metal-ceramic packages.
Tags: cold stamping metal-ceramic package metal parts металлические комплектующие металлокерамический корпус холодная штамповка
Y. Zhuo, V. Maslovsky, K. Moiseev, I. Vorobyov, M. Nazarenko
EQUIPMENT AND MATERIALS FOR THE MANUFACTURE OF METAL PARTS AT ZPP JSC DOI: 10.22184/1992-4178.2023.224.3.110.115
The article considers the capabilities of the method of electron-beam processing of ceramics. The results of experimental studies on the processing of VK94-DN and LTCC KEKO SK 47 sintered ceramics are presented.
EQUIPMENT AND MATERIALS FOR THE MANUFACTURE OF METAL PARTS AT ZPP JSC DOI: 10.22184/1992-4178.2023.224.3.110.115
The article considers the capabilities of the method of electron-beam processing of ceramics. The results of experimental studies on the processing of VK94-DN and LTCC KEKO SK 47 sintered ceramics are presented.