rus
Competent opinion
E. Ivanova
THERE IS EXPERTISE TO CREATE DOMESTIC MICROELECTRONICS CAD IN OUR COUNTRY DOI: 10.22184/1992-4178.2025.247.6.14.20
THERE IS EXPERTISE TO CREATE DOMESTIC MICROELECTRONICS CAD IN OUR COUNTRY DOI: 10.22184/1992-4178.2025.247.6.14.20
Column of radio-electronic industry department
Report from a company
Yu. Kovalevsky
TECHNOLOGIES THAT OPEN UP NEW OPPORTUNITIES NOT JUST IN THEORY BUT IN PRACTICE VISIT TO ADDITIVE TECHNOLOGY CENTER OF DIPAUL GROUP DOI: 10.22184/1992-4178.2025.247.6.44.54
TECHNOLOGIES THAT OPEN UP NEW OPPORTUNITIES NOT JUST IN THEORY BUT IN PRACTICE VISIT TO ADDITIVE TECHNOLOGY CENTER OF DIPAUL GROUP DOI: 10.22184/1992-4178.2025.247.6.44.54
Exhibitions & Conferences
Yu. Kovalevsky, E. Kasparova
DISCUSSION SESSIONS OF EXPOELECTRONICA 2025 PART 3 DOI: 10.22184/1992-4178.2025.247.6.36.42
DISCUSSION SESSIONS OF EXPOELECTRONICA 2025 PART 3 DOI: 10.22184/1992-4178.2025.247.6.36.42
Manufacturing equipment and process materials
Yu. Koval
CLEANING PRINTED CIRCUIT BOARDS FROM FLUX DOI: 10.22184/1992-4178.2025.247.6.138.142
The article describes the functional capabilities of the USOTP-1 vacuum jet cleaning machine developed by NPP PROTON. The innovative Russian “jets in a vacuum” technology provides highly efficient cleaning and drying of products, combining jet processing with cyclic vacuuming.
CLEANING PRINTED CIRCUIT BOARDS FROM FLUX DOI: 10.22184/1992-4178.2025.247.6.138.142
The article describes the functional capabilities of the USOTP-1 vacuum jet cleaning machine developed by NPP PROTON. The innovative Russian “jets in a vacuum” technology provides highly efficient cleaning and drying of products, combining jet processing with cyclic vacuuming.
Tags: automatic jet cleaning fluxes “jets in a vacuum” soldering ultrasonic cleaning usotp-1 vacuum drying vacuum system автоматическая струйная отмывка пайка система вакуумирования «струи в вакууме» сушка в вакууме ультразвуковая отмывка усотп-1 флюсы
CAD
V. Dozhdev, I. Kuzmenko, S. Safronov, A. Pereverzev, A. Korshunov
FORMATION OF APPROACHES TO THE DEVELOPMENT OF DOMESTIC VLSI CAD DOI: 10.22184/1992-4178.2025.247.6.56.64
The current conditions in the country have made it possible and necessary to create an ecosystem of domestic CAD systems. The article discusses the development trends of modern VLSI design tools, the structure of the global CAD market, as well as the prospects, organizational approaches and main directions of development of domestic CAD systems.
FORMATION OF APPROACHES TO THE DEVELOPMENT OF DOMESTIC VLSI CAD DOI: 10.22184/1992-4178.2025.247.6.56.64
The current conditions in the country have made it possible and necessary to create an ecosystem of domestic CAD systems. The article discusses the development trends of modern VLSI design tools, the structure of the global CAD market, as well as the prospects, organizational approaches and main directions of development of domestic CAD systems.
Tags: analog ics design flow digital vlsis microwave ics open source cad vlsi cad аналоговые ис маршрут проектирования сапр сбис сапр с открытым исходным кодом свч ис цифровые сбис
V. Sazonov, R. Erokhin, V. Serov, M. Sheblaev
DEVELOPMENT OF DOMESTIC SOFTWARE TOOLS FOR PHYSICAL DESIGN AND DIGITAL VLSI VERIFICATION DOI: 10.22184/1992-4178.2025.247.6.66.75
Lomonosov Moscow State University, as part of a cooperation headed by ISTC MIET, is developing three components of VLSI CAD: physical synthesis tool, parasitic parameters calculation tool and universal database for storing information on the IC being developed. The article discusses the tasks solved in the course of this work.
DEVELOPMENT OF DOMESTIC SOFTWARE TOOLS FOR PHYSICAL DESIGN AND DIGITAL VLSI VERIFICATION DOI: 10.22184/1992-4178.2025.247.6.66.75
Lomonosov Moscow State University, as part of a cooperation headed by ISTC MIET, is developing three components of VLSI CAD: physical synthesis tool, parasitic parameters calculation tool and universal database for storing information on the IC being developed. The article discusses the tasks solved in the course of this work.
Tags: cad parasitic parameters calculation tool physical synthesis tool universal database инструмент расчета паразитных параметров инструмент физического синтеза сапр универсальная база данных
A. Stempkovsky, E. Kozhevnikov, E. Demidov, R. Soloviev, D. Telpukhov, L. Pereverzev, V. Kartashev, V. Dozhdev, I. Nazarov, A. Tretyakov
SPECIAL TYPES OF ANALYSIS FOR MODERN ICs: CHALLENGES OF NANOMETER TECHNOLOGIES AND APPLICATION OF AI METHODS DOI: 10.22184/1992-4178.2025.247.6.76.82
The article presents an overview of special types of analysis for modern ICs that take into account such effects as IR drop in power buses, electromigration and signal integrity violation. Methods for implementing special types of analysis in design tools, including using machine learning, are considered.
SPECIAL TYPES OF ANALYSIS FOR MODERN ICs: CHALLENGES OF NANOMETER TECHNOLOGIES AND APPLICATION OF AI METHODS DOI: 10.22184/1992-4178.2025.247.6.76.82
The article presents an overview of special types of analysis for modern ICs that take into account such effects as IR drop in power buses, electromigration and signal integrity violation. Methods for implementing special types of analysis in design tools, including using machine learning, are considered.
Tags: cad design tool electromigration analysis ic ir drop analysis machine learning methods signal integrity analysis timing violation анализ падения напряжения анализ целостности сигналов анализ эффектов электромиграции инструмент проектирования ис методы машинного обучения нарушение тайминга сапр
V. Ukhin, V. Kuharuk
FREQUENCY ANALYSIS OF TRANSMISSION LINES IN SIMPCB LITE CAD DOI: 10.22184/1992-4178.2025.247.6.84.86
The article discusses the mathematical and physical principles
of calculating transmission line parameters depending on frequency, implemented in the SimPCB Lite CAD system. A comparison of the calculation results obtained using SimPCB Lite and Ansys program is given.
FREQUENCY ANALYSIS OF TRANSMISSION LINES IN SIMPCB LITE CAD DOI: 10.22184/1992-4178.2025.247.6.84.86
The article discusses the mathematical and physical principles
of calculating transmission line parameters depending on frequency, implemented in the SimPCB Lite CAD system. A comparison of the calculation results obtained using SimPCB Lite and Ansys program is given.
Tags: boundary element method cad frequency analysis transmission line impedance волновое сопротивление линии передачи метод граничных элементов сапр частотный анализ
D. Smorkalov, O. Zhirnov, Sh. Shugaepov, V. Egoshin, R. Akhmetgaliev
KOMPAS-3D FROM ASCON IS A PROFESSIONAL TOOL FOR DESIGNING TECHNOLOGICAL EQUIPMENT FOR METAL-CERAMIC PRODUCTION DOI: 10.22184/1992-4178.2025.247.6.88.90
KOMPAS-3D is a full-featured platform for engineers of the domestic mechanical engineering and electronics industries. When designing technological equipment for the production of metal-ceramic packages this system combines 3D simulation tools with the integration of Russian standards.
KOMPAS-3D FROM ASCON IS A PROFESSIONAL TOOL FOR DESIGNING TECHNOLOGICAL EQUIPMENT FOR METAL-CERAMIC PRODUCTION DOI: 10.22184/1992-4178.2025.247.6.88.90
KOMPAS-3D is a full-featured platform for engineers of the domestic mechanical engineering and electronics industries. When designing technological equipment for the production of metal-ceramic packages this system combines 3D simulation tools with the integration of Russian standards.
Tags: 3d simulation 3d-моделирование metal-ceramic packages technological equipment металлокерамические корпуса технологическая оснастка
Circuit Technique
A. Tokarev
HYBRID CONTROL SYSTEM FOR MEMRISTIVE ARRAYS: DEVELOPMENT OF A HIGH-LEVEL SCHEME AND IMPLEMENTATION PROSPECTS DOI: 10.22184/1992-4178.2025.247.6.106.112
The article proposes a memristive array control architecture that allows working with passive crossbar structures, which significantly increases the layout density and reduces the technological complexity of production. The main functional blocks of the system are described.
HYBRID CONTROL SYSTEM FOR MEMRISTIVE ARRAYS: DEVELOPMENT OF A HIGH-LEVEL SCHEME AND IMPLEMENTATION PROSPECTS DOI: 10.22184/1992-4178.2025.247.6.106.112
The article proposes a memristive array control architecture that allows working with passive crossbar structures, which significantly increases the layout density and reduces the technological complexity of production. The main functional blocks of the system are described.
Tags: analog-digital interaction потоков memristive crossbars memristive electronics synchronization of computational flows аналого-цифровое взаимодействие мемристивная электроника мемристивные кроссбары синхронизация вычислительных
Industrial Electronics
A. Bekmachev, A. Mikheev
GKV INERTIAL NAVIGATION MODULES: ANTI-SPOOFING AND ENHANCED NAVIGATION CAPABILITIES DOI: 10.22184/1992-4178.2025.247.6.92.97
Spoofing of global navigation systems can lead to location data corruption, which is especially dangerous for air and sea transport. The article discusses the solutions from “Laboratoriya Microbriborov” for autonomous inertial navigation that can resist spoofing.
GKV INERTIAL NAVIGATION MODULES: ANTI-SPOOFING AND ENHANCED NAVIGATION CAPABILITIES DOI: 10.22184/1992-4178.2025.247.6.92.97
Spoofing of global navigation systems can lead to location data corruption, which is especially dangerous for air and sea transport. The article discusses the solutions from “Laboratoriya Microbriborov” for autonomous inertial navigation that can resist spoofing.
Tags: autonomous inertial navigation global navigation satellite systems glonass gps jamming спуфинг spoofing автономная инерциальная навигация глобальные навигационные спутниковые системы глонасс джамминг
Reliability and tests
A. Roslyakov, R. Malyshev
CURRENT LOOK AT BURN-IN TESTING: FTT-17.XX.XXX SERIES STANDS FROM “SOVTEST ATE” DOI: 10.22184/1992-4178.2025.247.6.144.148
The article presents current information about stands for burn-in testing of semiconductor electronics products of FTT-17 series, developed by the company “Sovtest ATE”.
CURRENT LOOK AT BURN-IN TESTING: FTT-17.XX.XXX SERIES STANDS FROM “SOVTEST ATE” DOI: 10.22184/1992-4178.2025.247.6.144.148
The article presents current information about stands for burn-in testing of semiconductor electronics products of FTT-17 series, developed by the company “Sovtest ATE”.
Tags: model series parallel testing slots software two-camera model двухкамерная модель модельный ряд параллельная тренировка программное обеспечение слоты
V. Plebanovich, V. Svetenkova, V. Grishkevich
PHOTON EMISSION IS AN INNOVATIVE METHOD FOR ANALYZING DEFECTS IN MICROELECTRONICS DOI: 10.22184/1992-4178.2025.247.6.150.152
The analytical complex “Photon”, developed jointly by “Optoelectronic systems” JSC and NTC “Belmicrosystems”, solves the problem of identifying hidden defects of integrated circuits, such as structural defects of the crystal lattice, local current leaks and overheating of power elements.
PHOTON EMISSION IS AN INNOVATIVE METHOD FOR ANALYZING DEFECTS IN MICROELECTRONICS DOI: 10.22184/1992-4178.2025.247.6.150.152
The analytical complex “Photon”, developed jointly by “Optoelectronic systems” JSC and NTC “Belmicrosystems”, solves the problem of identifying hidden defects of integrated circuits, such as structural defects of the crystal lattice, local current leaks and overheating of power elements.
Power electronics
T. Gaikazyan
TETHERED DRONES AND THE ROLE OF SMARTPOWER HIGH-VOLTAGE DC/DC CONVERTERS IN ENSURING STABLE POWER SUPPLY DOI: 10.22184/1992-4178.2025.247.6.98.102
The article discusses the specifics of using tethered drones that is aircraft that receive power from a ground source via a cable. Particular attention is paid to the role of SmartPower high-voltage DC/DC converters in ensuring efficient power supply for onboard systems.
TETHERED DRONES AND THE ROLE OF SMARTPOWER HIGH-VOLTAGE DC/DC CONVERTERS IN ENSURING STABLE POWER SUPPLY DOI: 10.22184/1992-4178.2025.247.6.98.102
The article discusses the specifics of using tethered drones that is aircraft that receive power from a ground source via a cable. Particular attention is paid to the role of SmartPower high-voltage DC/DC converters in ensuring efficient power supply for onboard systems.
Tags: dc/dc converters dc/dc-преобразователи ground power station smartpower modules tethered drones модули smartpower наземная станция питания привязные дроны
Production technologies
D. Sukhanov
PRECISION WAFER THINNING USING GLASS INTERMEDIATE CARRIER DOI: 10.22184/1992-4178.2025.247.6.126.132
The article considers methods of precision thinning of semiconductor wafers and substantiates the expediency of using a glass substrate. The influence of elastic characteristics and thermal expansion coefficients on the deformation of a bilayer structure is analyzed, and the stresses arising during wafer dismantling are investigated to check the reliability of the glass carrier.
PRECISION WAFER THINNING USING GLASS INTERMEDIATE CARRIER DOI: 10.22184/1992-4178.2025.247.6.126.132
The article considers methods of precision thinning of semiconductor wafers and substantiates the expediency of using a glass substrate. The influence of elastic characteristics and thermal expansion coefficients on the deformation of a bilayer structure is analyzed, and the stresses arising during wafer dismantling are investigated to check the reliability of the glass carrier.
Tags: bilayer plate cte glass carrier mechanical debonding precision thinning tensile strength двуслойная пластина ктр механический дебондинг предел прочности прецизионное утонение стеклянный носитель
S. Shikhov
LASER REBALLING: HOW MODERN TECHNOLOGIES HELP IMPROVE ELECTRONICS DOI: 10.22184/1992-4178.2025.247.6.134.136
Laser reballing is an innovative technology for repairing ICs in BGA packages that uses a laser for precise positioning and reliable soldering of solder balls to the BGA component package. The article describes the technological process and discusses the advantages of the method.
LASER REBALLING: HOW MODERN TECHNOLOGIES HELP IMPROVE ELECTRONICS DOI: 10.22184/1992-4178.2025.247.6.134.136
Laser reballing is an innovative technology for repairing ICs in BGA packages that uses a laser for precise positioning and reliable soldering of solder balls to the BGA component package. The article describes the technological process and discusses the advantages of the method.
Tags: bga component bga-компонент : laser reballing nitrogen environment solder ball solder joint азотная среда лазерный реболлинг паяное соединение шарик припоя
Micro and nanostructures
V. Kochemasov, V. Gorbachev, S. Khorev
HIGH-FREQUENCY CAPACITORS MANUFACTURED USING MEMS TECHNOLOGY DOI: 10.22184/1992-4178.2025.247.6.116.124
The article provides an overview of the main technologies used to manufacture microelectromechanical systems (MEMS). It examines the design features of MEMS capacitors and their operating principles, and provides examples
of devices based on them.
HIGH-FREQUENCY CAPACITORS MANUFACTURED USING MEMS TECHNOLOGY DOI: 10.22184/1992-4178.2025.247.6.116.124
The article provides an overview of the main technologies used to manufacture microelectromechanical systems (MEMS). It examines the design features of MEMS capacitors and their operating principles, and provides examples
of devices based on them.