THERE IS NO OBJECTIVE OBSTRUCTION TO FURNISH CII WITH DOMESTIC TRUSTED SOLUTIONS. THERE IS ONLY WILL TO WIN NEEDED DOI: 10.22184/1992-4178.2020.201.10.10.16
THE NEW INTEGRATED RESEARCH AND TECHNOLOGY PROGRAM FOR MICROELECTRONICS AND RADIO-ELECTRONICS INDUSTRY DEVELOPMENT DOI: 10.22184/1992-4178.2020.201.10.18.22
SMART LOW-VOLUME ASSEMBLY SITE: MAXIMUM FLEXIBILITY, QUICK CHANGEOVER, ACCURATE ACCOUNTING VISIT TO ASSEMBLY FACILITY OF NIITM JSC DOI: 10.22184/1992-4178.2020.201.10.54.62
LEGAL REGULATION OF UNMANNED VEHICLES MEETING OF THE DEFENSE INDUSTRIAL COMPLEX SECTION OF THE EXPERT COUNCIL OF THE FEDERATION COUNCIL COMMITTEE ON DEFENSE AND SECURITY DOI: 10.22184/1992-4178.2020.201.10.42.43
GALLIUM NITRIDE MICROWAVE COMPONENTS: AN INSIDE LOOK DOI: 10.22184/1992-4178.2020.201.10.44.51
EXPERIENCE IN THE DEVELOPMENT AND PRODUCTION OF MICROWAVE MICRO-ASSEMBLIES AND MODULES BASED ON SCM, А DOMESTIC SYSTEM OF LOW TEMPERATURE COFIRED CERAMIC DOI: 10.22184/1992-4178.2020.201.10.64.69
The article describes the characteristics of SCM, a domestic LTCC system for microwave applications, in comparison with systems from other manufacturers. It presents the results of joint NPC SpetsElectronSystemy JSC and Shokin’s NPP Istok JSC work on the design and manufacture of microwave modules based on SCM, as well as approaches to solving technological problems in the development and manufacturing of LTCC products.
GENERAL STRUCTURAL ANALYSIS OF THE APPLICABILITY OF DOMESTIC AND IMPORTED ELECTRONIC COMPONENTS IN RADIO-ELECTRONIC INDUSTRY DOI: 10.22184/1992-4178.2020.201.10.106.109
The article proposes a new approach to planning and evaluating the feasibility of the development work in creation of domestic electronic components by carrying-out a general structural analysis of the applicability of domestic and imported electronic components in electronic product.
DESIGN CONSIDERATIONS FOR FLEX AND RIGID-FLEX PRINTED CIRCUIT BOARDS. Part 2 DOI: 10.22184/1992-4178.2020.201.10.136.141
The article considers the specific features of the processes of component placement, polygon routing and creating on flexible board sections, the formation of associative three-dimensional models and technological preparation for the production of flexible and flex-rigid printed circuit boards using the example of Mentor Graphics Xpedition and PADS Professional end-to-end design routes.
HIGH-SPEED SOLID STATE MICROWAVE SWITCHES. Part 1 DOI: 10.22184/1992-4178.2020.201.10.70.82
The article considers high-speed solid state microwave switches. Information on modular pin-diode switches of various types produced by different manufacturers is given.
ANALOG DEVICES RF /MICROWAVE COMPONENTS OVERVIEW: KEY DEVICE CATEGORIES AND APPLICATIONS DOI: 10.22184/1992-4178.2020.201.10.84.88
The article provides an overview of the main groups of RF / microwave components manufactured by Analog Devices, the key features of new products released to the market recently, emerging applications for these products.
TERAHERTZ QUANTUM-CASCADE LASERS IN RUSSIA: CURRENT STATUS AND PROSPECTS DOI: 10.22184/1992-4178.2020.201.10.90.93
The article presents the most significant results in development, manufacture and research of terahertz quantum-cascade lasers in Russia.
NITRIDE MICROWAVE ELECTRONICS IN RUSSIA: SHOULD WE WAIT A LITTLE LONGER, WE WON’T CATCH UP DOI: 10.22184/1992-4178.2020.201.10.94.99
Among the most severe issues of import substitution being solved by domestic manufacturers of competitive microwave electronics, is the launch of emerging, but still not mastered in Russia, developments of an electronic components based on wide-gap semiconductors of GaN group.
IS IT POSSIBLE TO REPLACE IMPORTED GAN MICROWAVE TRANSISTORS FROM WELL-KNOWN WORLD MANUFACTURERS WITH DOMESTIC ANALOGUES? DOI: 10.22184/1992-4178.2020.201.10.100.104
The article discusses the results of measuring the parameters of a GaN HEMT from PKK Milandr JSC as part of a test power amplifier operating in continuous mode in 3.4–3.8 GHz frequency range, makes a comparison the data obtained with the characteristics of Wolfspeed CGHV40030F GaN transistor. The PKK Milandr JSC advanced developments in the field of microwave GaN HEMT for a wide range of frequencies and power transistors are presented.
ELIOT: A SYSTEM ON CHIP FOR IoT DOI: 10.22184/1992-4178.2020.201.10.122.130
As part of the implementation of “from the periphery to the cloud” domestic strategy NPC ELVIS JSC has developed the Eliot SoC, intended for use in conditions of limited energy consumption and providing trusted environment in IoT networks. The article presents the architectural features, key characteristics, the main applications of new SoC.
HOW TO MULTIPLY THE POWER OF A BOOST CONVERTER WITH A VERSATILE PHASE EXPANDER DOI: 10.22184/1992-4178.2020.201.10.132.135
The article describes Analog Devices phase expander IC solution that enables to increase the phase count of single-phase controller based boost converters to create a highly efficient, compact, high-output power supply for automotive and industrial applications.
SIX WAYS TO CREATE INTERNET CONNECTIVITY IN IoT APPLICATIONS DOI: 10.22184/1992-4178.2020.201.10.118.121
The article provides an overview of the most common Internet connection types used in IoT applications. This information will help you evaluate the various options and choose the best connection method for your specific IoT application.
OPTIMIZATION OF PARALLEL COMPUTING FOR ONBOARD REAL-TIME SYSTEMS. Part 1 DOI: 10.22184/1992-4178.2020.201.10.110.116
The development of onboard equipment for air / spacecraft and other objects is characterized by permanent increase in the number of tasks to be solved, an increase in their complexity and an extension of intelligent and adaptive capabilities. These requirements could be met by organizing parallel computing processes.