SYSTEMIC APPROACH AND UNDERSTANDING OF USER’S PRIORITIES ARE THE FOUNDATION OF EFFECTIVE TECHNOLOGICAL DEVELOPMENT DOI: 10.22184/1992-4178.2020.199.8.10.16
THE INTRODUCTION OF NEW PRODUCTION MANAGEMENT TECHNOLOGIES IS A KEY FOR THE DEVELOPMENT OF NIIET DOI: 10.22184/1992-4178.2020.199.8.18.22
INERTIAL SYSTEM BASED ON PKK MILANDR JSC SIGNAL PROCESSOR AND MEMS SENSORS DOI: 10.22184/1992-4178.2020.199.8.130.134
PKK Milandr JSC has developed a miniature inertial navigation module intended for use in various fields: unmanned aerial vehicles, cars, space technology, weapons, television, cinematography, etc.
KEY RELIABILITY FACTORS OF PELTIER MODULES AS EXEMPLIFIED BY CUI DEVICES PRODUCTS DOI: 10.22184/1992-4178.2020.199.8.136.138
The article provides basic information about the design and operational principles of Peltier modules, as well as widespread reasons for the failure of these elements, which should be taken into account when building a reliable system.
POWER SEMICONDUCTOR DYNAMIC RESPONSE ANALYZER DOI: 10.22184/1992-4178.2020.199.8.82.86
The article discusses the design aspects of standard dual-pulse test (DPT) system used to correlate results between multiple test systems.
ELECTROMAGNETIC NOISE AND METHODS OF THEIR SUPPRESSION DURING ELECTRICAL TESTING OF DEVICES PRIOR TO PACKAGING DOI: 10.22184/1992-4178.2020.199.8.88.93
The article gives practical recommendations for effective suppression of electromagnetic noise when measuring the electrical characteristics of devices before the packaging stage. The applications of these recommendations on real equipment examples are considered.
USING PHASE COMPENSATION TECHNIQUE TO CHANGE THE SIGNAL WAVEFORM AND SPECTRUM DOI: 10.22184/1992-4178.2020.199.8.94.96
The article analyzes the use of phase compensation technique for changing the signal waveform and spectrum. Examples of the method implementation with R&S®SMW200A vector signal generator and R&S®ZNA vector network analyzer from Rohde & Schwarz are given.
SELECTION OF CAD FOR PCB DESIGN: HOW TO AVOID BEING STUCK IN A TIME WARP? DOI: 10.22184/1992-4178.2020.199.8.102.108
The article discusses major requirements to professional CAD systems for PCB design. It justifies the need to use modern PCB design tools in order to achieve effectiveness and competitive ability in current conditions.
ALTIUM CONCORD PRO. PROJECT MANAGEMENT DOI: 10.22184/1992-4178.2020.199.8.110.116
For managing design data Altium offers Altium Concord Pro server software which not only provides reliable and secure data storage, but also allows you to track project changes without overwriting previously released data. The article discusses the functionality of Altium Concord Pro available to electronic device developers in Altium Designer CAD.
RESPONDING TO NEW CHALLENGES IN ELECTROMAGNETIC COMPATIBILITY “ELECTROMAGNETIC COMPATIBILITY” THE 9th ALL-RUSSIA SCIENCE AND TECHNOLOGY CONFERENCE DOI: 10.22184/1992-4178.2020.199.8.38.40
INTELLIGENT INFORMATION SYSTEMS FOR CONTROL OF PRODUCTION AND DELIVERY OF RADIO-ELECTRONIC PRODUCTS DOI: 10.22184/1992-4178.2020.199.8.140.143
The article considers the approaches to the creation of automated control systems for production and delivery of products in holding companies using expert intelligent information systems.
SKIF: SYSTEM ON CHIP FOR MOBILE AND EMBEDDED COMMUNICATION, NAVIGATION AND MULTIMEDIA SYSTEMS DOI: 10.22184/1992-4178.2020.199.8.120.129
Skif 11-core heterogeneous SoC developed at NPC Elvis JSC is designed to build mobile and embedded intelligent systems for telecommunication, navigation, multimedia applications, multisensor signal processing, robotic systems and other applications. The article presents the architectural features, key characteristics, main applications of new So C.
PROCESS CONDITIONS OPTIMIZATION FOR LASER SOLDERING OF LEAD-FREE SOLDER BALLS IN MICROELECTRONICS 3D STRUCTURES DOI: 10.22184/1992-4178.2020.199.8.144.148
The article describes the technological system for formation of bulk soldering leads on contact pads of 2.5- and 3D‑structures of electronics products and the technique for selecting the power of laser radiation source for reflowing a solder ball of a given diameter.
POWER ELECTRONICS IN RUSSIAN RAILWAYS DOI: 10.22184/1992-4178.2020.199.8.42.44
The article considers the features of converter device development demanding in railway transport. It is noted that the introduction of the latest methods of digital regulation and signal processing into various converter devices and systems becomes essential today.
POWER SiC AND GaN DEVICES: DEVELOPMENT PROSPECTS The further development of power electronics is associated with the improvement of power semiconductor devices. The possibilities of traditional silicon technology are practically exhausted, further prospects are associated with devices based on silicon carbide (SiC) and gallium nitride (GaN).
EMI REDUCING IN AUTOMOTIVE POWER SUPPLIES DOI: 10.22184/1992-4178.2020.199.8.60.66
The article describes Analog Devices’ compact buck regulator solution that provides wide input voltage conversion up to 42 V with 7 A peak output current, high efficiency at low and high loads, low EMI and excellent thermal performance.
HOW TO IMPROVE THE THERMAL PERFORMANCE OF MODULAR SWITCHING POWER SUPPLIES DOI: 10.22184/1992-4178.2020.199.8.68.70
The thermal performance of modular power supplies is becoming a key factor in the reliability and life cycle of electronic devices today. The article discusses modern solutions for modular power supplies that improve thermal performance, increase their efficiency and reduce the size of the end product.
EVERYTHING YOU NEED TO KNOW WHEN CHOOSING A MEDICAL POWER SUPPLY DOI: 10.22184/1992-4178.2020.199.8.72.80
An integral component of any medical device is a power supply, which not only ensures the trouble-free operation of all equipment units, but also protects the patient himself from the dangerous effects of electrical circuits. The article discusses the main components of medical electrical safety concept, individual norms of the latest edition of IEC 60601-1 standard, provides recommendations for choosing a power supply for medical equipment.