ONE OF OUR FOCUS AREAS IS EXPANDING OUR PRESENCE IN THE CIVILIAN MARKET DOI: 10.22184/1992-4178.2024.235.4.12.18
HOW TEST AND MEASUREMENT INSTRUMENTS FOR MICROWAVE ELECTRONICS ARE CREATED: QUALITY, ACCURACY, AND… COST-EFFECTIVENESS VISIT TO THE PRODUCTION FACILITY OF PLANAR LLC DOI: 10.22184/1992-4178.2024.235.4.36.47
MICROWAVE SYSTEMS JSC – 20 YEARS IN SERVICE TO THE FATHERLAND DOI: 10.22184/1992-4178.2024.235.4.48.52
Microwave Systems JSC is one of the domestic leaders in the development and production of microwave electronics components and modules. Recently, the company has been developing a number of new promising areas of scientific and industrial activity.
USE OF ROBOTICS AND ARTIFICIAL INTELLIGENCE IN ENTERPRISES OF MILITARY-INDUSTRIAL COMPLEX. MEETING OF THE MILITARY AND INDUSTRIAL POLICY AND BUDGET SECTION OF THE EXPERT COUNCIL OF THE FEDERATION COUNCIL COMMITTEE ON DEFENSE AND SECURITY DOI: 10.22184/1992-4178.2024.235.4.30.34
METAL-CERAMIC PACKAGES FROM «ZPP» JSC FOR RF AND MICROWAVE DEVICES DOI: 10.22184/1992-4178.2024.235.4.86.90
The article considers the development and production at «Semiconductor Device Plant» JSC («ZPP» JSC) of leadless metal-ceramic packages for RF and microwave devices, examples of such products are also given.
NOISE FIGURE MEASUREMENT DOI: 10.22184/1992-4178.2024.235.4.92.102
An effective method for measuring noise figure is to use vector network analyzers equipped with the NF option. The article describes the equipment and methodology for measuring noise figure using vector network analyzers produced by PLANAR LLC with the NF option.
MEASURING NOISE GENERATED BY DC MOTORS USING RIGOL INSTRUMENTS. PART 1 DOI: 10.22184/1992-4178.2024.235.4.104.110
The article discusses the main reasons for the formation of conducted electromagnetic interference by DC motors. The influence of the technical and operating conditions of DC motors on the level of interference emission is assessed, methods for reducing and measuring interference generated by DC motors are described.
MULTISENSORY CLUSTER SCANNING SYSTEM FOR ROUNDNESS TESTERS DOI: 10.22184/1992-4178.2024.235.4.114.118
The article discusses the issue of using a triplex (multisensor) sensor of the capacitive-optical-eddy current type, which has a preliminary conversion system. The sensor was used as an alternative to a contact probe when taking measurements using a RoundTest RA-120P roundness tester.
A LOOK AT THE PROSPECTS FOR ULTRA-WIDEBAND SOLID-STATE RADIO ELECTRONICS FROM 2024 DOI: 10.22184/1992-4178.2024.235.4.54.60
The article analyzes, according to the authors, the successful experience of developing UWB radars for trucks, including unmanned ones, in the version of ultra-short pulse (USP) radio-electronic systems at NPP Radar mms JSC.
ULTRA-SHORT PULSE PROBING SIGNALS IN NEAR LOCATION SYSTEMS DOI: 10.22184/1992-4178.2024.235.4.62.66
The use of ultra-short pulse probing signals in radars and lidars can significantly increase the resolution and noise immunity of near location systems. This article compares three ultra-short pulse radar designs for near location systems and discusses their advantages, disadvantages and possible applications.
MICROWAVE ICs FOR ON-BOARD REMOTE SENSING EQUIPMENT AND SPACE COMMUNICATION SYSTEMS. PART 2 DOI: 10.22184/1992-4178.2024.235.4.68.71
The progress in astronautics is largely determined by the level of development of microwave technology, widely used in space communications, spacecraft navigation systems, the Earth remote sensing equipment (ERS) and other areas.
DESIGN AND SIMULATION OF MICROWAVE FILTER WITH FLIP-CHIP CONTACTS DOI: 10.22184/1992-4178.2024.235.4.72.74
The article presents the results of simulating microwave bandpass filter using the domestic Gamma CAD system and comparing them with parameters measured on production samples. The possibility of estimating the dielectric constant of materials used for the manufacture
of microwave filters has been studied.
MEMS RF / MICROWAVE SWITCHES. PART 1 DOI: 10.22184/1992-4178.2024.235.4.76.84
The article considers MEMS RF / microwave switches. Information is provided on the features and characteristics of various types of such devices produced by a number of manufacturers.
MICROCONTROLLERS AND FLASH MEMORY FROM GigaDevice DOI: 10.22184/1992-4178.2024.235.4.126.130
GigaDevice Semiconductor is the world’s leading fabless developer of flash memory chips and microcontrollers. The article provides an overview of the main GigaDevice product lines.
FIBER-OPTIC GYROSCOPES AND SYSTEMS BASED ON THEM. PART 2 DOI: 10.22184/1992-4178.2024.235.4.120.123
Fiber-optic gyroscopes are used in various industries to solve a wide range of problems. The second part of the article continues a review of the areas of application of these devices and examines key trends in the development of fiber-optic gyroscopes and systems based on them.
USE OF ELECTRONIC COMPONENTS WITH EXPIRED STORAGE PERIOD DOI: 10.22184/1992-4178.2024.235.4.146.148
Due to the fact that the production and commissioning of military equipment takes considerable time, the problem arises of using electronic components that were discontinued during
the product design process. To solve this problem, studies are carrying out to assess the possibility of extending the shelf life of electronic components.
USING ARTIFICIAL NEURAL NETWORKS TO CONTROL COMPUTATIONAL PROCESSES DOI: 10.22184/1992-4178.2024.235.4.136.144
The article provides a formalized approach to solving the problem of distributing the computing resources of an information system between its subsystems, based on the theory of strategic games.