RUSSIAN QUALITY MUST BECOME A BRAND DOI: 10.22184/1992-4178.2022.221.10.12.18
ELECTRONIC COMPONENTS FOR THE DOMESTIC JOINT SESSION OF “PASSIVE ELECTRONIC COMPONENTS” CONSORTIUM, CONSORTIUM OF ENTERPRISES IN THE FIELD OF AUTOMOTIVE ELECTRONIC DEVICES AND TELEMATICS AND SECTION NO. 9 OF INTERDEPARTMENTAL WORKING GROUP OF THE COLLEGIUM OF MILITARY INDUSTRIAL COMMISSION OF THE RUSSIAN FEDERATION
EVALUATION OF THE EFFECTIVENESS OF THE USE OF INTELLECTUAL ACTIVITY RESULTS BY SMALL ENTERPRISES GAINING GRANT SUPPORT DOI: 10.22184/1992-4178.2022.221.10.130.132
During 2021–2022 “Union of Innovation and Technology Centers of Russia” non-profit organization monitored the projects of the Fund for assistance to the development of small enterprises in the scientific and technical sphere. The article discusses the results of monitoring, provides data from statistical and analytical studies.
CHIPS Act AND IMPROVING THE US R&D ECOSYSTEM DOI: 10.22184/1992-4178.2022.221.10.134.142
For the semiconductor industry, as a capital-intensive and knowledge-intensive industry, government funding of R&D and public-private partnerships in the implementation of these works are very important. The article discusses these issues using the example of the Creating Helpful Incentives to Produce Semiconductors for America Act (CHIPS Act).
RUICHI BRAND FLUOROPLASTIC TUBES DOI: 10.22184/1992-4178.2022.221.10.118
The article discusses Ruichi brand fluoroplastic tubes used as insulating sheaths of wires and cables, which are suitable for extreme operation conditions and do not lose their dielectric properties in a wide temperature range.
HYBRID PASSIVE-ACTIVE MINIATURE ELECTROMAGNETIC PROTECTION SYSTEMS DOI: 10.22184/1992-4178.2022.221.10.100.110
Promising methods of electromagnetic protection are the formation of special coatings on the surface of protected objects that absorb the energy of electromagnetic waves, as well as the use of miniature electronic power limiters. The article considers the main methods of conformal integration of electromagnetic protection systems with electronic devices.
SCIENTIFIC SCHOOLS FOR THE DEVELOPMENT OF FPGA CAD SOFTWARE TOOLS DOI: 10.22184/1992-4178.2022.221.10.112.117
The development and adoption of domestic FPGA CAD requires the creation in Russia of modern scientific schools in the field of FPGA design. The article presents an overview of the leading foreign and domestic scientific schools for the development of FPGA CAD software tools.
MEASUREMENT OF ELECTRONIC COMPONENTS PARAMETERS. CONCEPTUAL FRAMEWORK FOR THE ESTABLISHMENT AND IMPLEMENTATION OF MANDATORY METROLOGICAL REQUIREMENTS DOI: 10.22184/1992-4178.2022.221.10.38.42
The article considers the issues related to the modernization of the industry standards system in the key area of metrological support of the life cycle processes of radio electronics products.
GEOMETRIC TOLERANCES SYSTEM FOR PRODUCTS OF MECHANICAL ENGINEERING AND INSTRUMENTATION. PROBLEMS OF DEVELOPMENT OF AN INNOVATIVE GROUP OF GAPS AND TIGHTNESS DOI: 10.22184/1992-4178.2022.221.10.44.46
The article discusses the use of ANSI system fits and ISO standard graphic symbols to reduce potential defects in shape, orientation, location, and runout tolerances.
MEASUREMENT OF GEOMETRY DEFECTS. ROUNDTEST RA 120Р CIRCULAR PATTERN FORMATION ALGORITHM DOI: 10.22184/1992-4178.2022.221.10.48.51
The article describes the algorithm for forming a circular pattern on the ROUNDTEST RA 120P out-of-round gauge, which is used in the process of calibration and subsequent measurement of geometry defects.
METROLOGICAL SUPPORT OF ZPP JSC AS A TOOL TO IMPROVE PRODUCT QUALITY DOI: 10.22184/1992-4178.2022.221.10.52.56
The article considers the metrological support of “Plant of Semiconductor Devices” JSC (ZPP JSC). It is noted that in ensuring high quality indicators of the developed products, the primary role belongs to reliable measurements of technical parameters: without correctly performed measurements it is impossible to estimate the quality and reliability of products.
IMPLEMENTATION OF INTERLABORATORY COMPARISONS IN THE MEASUREMENT OF INTRODUCED INTERFERENCE IN THE POWER LINE USING PROGRAMMABLE POWER SUPPLIES DOI: 10.22184/1992-4178.2022.221.10.58.61
To conduct interlaboratory comparisons in terms of measuring the introduced interference in power lines (harmonic levels, voltage changes and deviations, as well as flicker) it is proposed to use a programmable power supply with input normalized power line distortions. The article presents the examples of the results of testing the proposed approach, which showed its efficiency.
The article reviews the principles of radar operation. It is provided information on the characteristics of Tabor Electronics Proteus transceivers and their applications for radar testing.
ANTENNA SWITCHES. Part 4 DOI: 10.22184/1992-4178.2022.221.10.76.91
The article considers the antenna switches. Information is provided on the features and characteristics of CMOS integrated transceiver switches.
THE CONCEPT OF BUILDING MODULAR DIGITAL CONVERTERS IN POWER SUPPLY SYSTEMS DOI: 10.22184/1992-4178.2022.221.10.92.97
The article considers the possibility of universalizing miniature DC / DC converters by moving to digital control methods for modular power supplies. The prospects for the development of digital platforms for building modular power converters are shown.
OVERVIEW OF EXOSKELETON CONTROL METHODS: FROM BUTTONS TO NEURAL NETWORKS DOI: 10.22184/1992-4178.2022.221.10.70.75
The article considers various control systems for exoskeletons and a neural network algorithm developed at the laboratory of neuromorphic systems of NIIME JSC.
RESEARCH OF THE PROCESS OF SODIUM CARBONATE CRYSTALLIZATION IN HIGHLY ALKALINE SOLUTIONS DOI: 10.22184/1992-4178.2022.221.10.120.129
The article considers the crystallization of soda (sodium carbonate) in highly alkaline solutions. Information is given on the formulation and results of experiments, as well as on the use of equilibrium sodium carbonate crystals.