HOW TO ACHIEVE HIGH QUALITY WHEN ASSEMBLING, CONFORMAL COATING APPLYING AS WELL AS REMOVING OF COATINGS VISIT TO ASSEMBLY FACILITY OF NPP “PRIMA” LTD
WHEN PLANT IS STAFF’S HOME FROM HOME DOI: 10.22184/1992-4178.2021.206.5.12.18
ACCELERATED TESTS FOR ELECTRONIC COMPONENTS STORAGEABILITY DOI: 10.22184/1992-4178.2021.206.5.98.104
The article discusses the problem of the lack of reference data for calculating the acceleration factor of tests for electronic components storageability. A technique based on the analysis of the results of accelerated tests in different modes is proposed.
MODERN R1-160 MICROWAVE CHIP RESISTORS AND NR1-85 RESISTOR CHIP SETS FROM NPO ERKON JSC DOI: 10.22184/1992-4178.2021.206.5.74.78
The article presents the results of the measurement of parameters of new products from NPO ERKON JSC: R1-160 microwave chip resistors and NR1-85 resistor chip sets. The influence of the design features of resistors and test board contact pads on the measurement results is shown.
The article provides a summary of the characteristics, selection criteria and main types of SAW filters offered by RF360.
THIN-FILM IPD: TECHNOLOGIES, PROSPECTS DOI: 10.22184/1992-4178.2021.206.5.46.51
The article analyzes the structure of the IPD market and gives the forecast for 2025. IPD technology and a dedicated IPD design platform are considered.
ELECTROCHEMICAL ENERGY STORAGE SYSTEM BASED ON MULTILAYER CARBON-POLYMER IONISTOR DOI: 10.22184/1992-4178.2021.206.5.52.55
Aviaavtomatika n. a. V. V. Tarasov JSC developed the technology for the manufacture of multilayer carbon-polymer ionistor using advanced materials. The article discusses the design and technological features, characteristics, applications of new device, provides a comparison with imported counterparts.
DEVELOPMENT AND MASTERING OF SERIAL PRODUCTION OF DISK CAPACITOR ARRAYS DOI: 10.22184/1992-4178.2021.206.5.60.62
The article is dedicated to the development and mastering of serial production of multilayer ceramic disk arrays of capacitors at Kulon LLC. These products are designed for use as a built-in element in an electrical connector with low-pass filters. The characteristics and technologies of these products are considered.
TAITIEN CRYSTAL FREQUENCY CONTROL COMPONENTS OVERVIEW DOI: 10.22184/1992-4178.2021.206.5.64.69
Taitien is one of the leading manufacturers of crystal frequency control components. The article provides an overview of the main categories and series of components manufactured by the company.
RESISTORS – BASIC TYPES AND CHARACTERISTICS. Part 1 DOI: 10.22184/1992-4178.2021.206.5.70.73
The article considers the resistors of various types. The information on the main characteristics of these components is provided.
SIGNAL PROCESSING AND CONVERSION STAGES IN MEASURING CHANNELS WITH A SILICON DETECTOR. Part 2 DOI: 10.22184/1992-4178.2021.206.5.106.114
The second part of the article considers the implementation features of analog-to-digital and digital-to-analog converters, as well as baseline stabilizers, used for the readout electronics of silicon detectors in high-energy physics and physics of cosmic rays projects.
Industrial systems often require isolated digital control of analog output modules. The article describes a solution based on an integrated digital isolator for controlling the precision 16-bit DAC with current and voltage outputs.
DESIGNING FO WLP PACKAGES AND MICRO-ASSEMBLIES USING MENTOR GRAPHICS CAD. Part 2 DOI: 10.22184/1992-4178.2021.206.5.126.134
Applying Mentor Graphics’ CAD design flow gives FO WLP package and micro-assembly designers all the functionality, design and verification tools they need to get the most out of the new package technology.
SOURCES OF SYSTEMIC PROBLEMS IN THE DEVELOPMENT OF RADIO-ELECTRONIC AND ELECTRONIC INDUSTRY IN RUSSIA Part 2. 1945–1960 DOI: 10.22184/1992-4178.2021.206.5.136.140
The development of the industrial and technological complex of electronic and radio-electronic industry is associated with priorities in the development of industry and the country as a whole. The article analyzes the current situation in the industry. An attempt is made to answer the question: is it possible to reverse the situation that has formed due to a series of strategic miscalculations of the past periods of the country's development.
MOLEX SOLUTIONS FOR TELECOMMUNICATIONS INFRASTRUCTURE AND DATA CENTERS DOI: 10.22184/1992-4178.2021.206.5.86.90
The article provides an overview of Molex components for modern telecommunications infrastructure and data centers, some solutions in the field of RF and high-speed connectors and cable assemblies of this manufacturer are considered.
NEW PACKAGES FOR POWER SUPPLIES AND POWER INTEGRATED CIRCUITS DOI: 10.22184/1992-4178.2021.206.5.120.124
TESTPRIBOR JSC has mastered the serial production of a number of metal-and-ceramic packages for secondary power supplies and power integrated circuits with local radiation shields and increased thermal conductivity of the bases.
HOW TO IMPROVE THE EFFICIENCY OF ELECTROMECHANICAL PRODUCTION DOI: 10.22184/1992-4178.2021.206.5.92.97
The article describes the process of producing stators for low-voltage and high-voltage motors using a modern automated line. It is noted that the described solution provides high production efficiency and significantly increases the quality of manufactured products.