rus
Competent opinion
А. Narbutt
IN ORDER TO SOLVE URGENT TASKS RAPIDLY, SiPs SEEM TO BE THE BEST, IF NOT THE ONLY SOLUTION DOI: 10.22184/1992-4178.2022.220.9.10.17
IN ORDER TO SOLVE URGENT TASKS RAPIDLY, SiPs SEEM TO BE THE BEST, IF NOT THE ONLY SOLUTION DOI: 10.22184/1992-4178.2022.220.9.10.17
M. Gurbashkov
WE MUST CREATE NOT POINT SOLUTIONS, BUT HIGH-QUALITY STANDARD LINES OF SERIES-PRODUCED COMPONENTS AND DRIVES DOI: 10.22184/1992-4178.2022.220.9.18.23
WE MUST CREATE NOT POINT SOLUTIONS, BUT HIGH-QUALITY STANDARD LINES OF SERIES-PRODUCED COMPONENTS AND DRIVES DOI: 10.22184/1992-4178.2022.220.9.18.23
А. Egorov
THE BEST SUPPORT FOR A MANUFACTURER IS TO ENSURE GUARANTEED LONG TERM DEMAND DOI: 10.22184/1992-4178.2022.220.9.24.29
THE BEST SUPPORT FOR A MANUFACTURER IS TO ENSURE GUARANTEED LONG TERM DEMAND DOI: 10.22184/1992-4178.2022.220.9.24.29
Column of radio-electronic industry department
Exhibitions & Conferences
Yu. Kovalevsky
CONSIDERATIONS ON PROVIDING RADIO-ELECTRONIC INDUSTRY ENTERPRISES WITH ELECTRONIC COMPONENTS. “ECB 2022” THE 11TH ALL-RUSSIA SCIENCE AND TECHNOLOGY CONFERENCE DOI: 10.22184/1992-4178.2022.220.9.48.52
CONSIDERATIONS ON PROVIDING RADIO-ELECTRONIC INDUSTRY ENTERPRISES WITH ELECTRONIC COMPONENTS. “ECB 2022” THE 11TH ALL-RUSSIA SCIENCE AND TECHNOLOGY CONFERENCE DOI: 10.22184/1992-4178.2022.220.9.48.52
Р. Мангушева
ПОТЕНЦИАЛ И ПРИОРИТЕТЫ ИНДИЙСКО-РОССИЙСКОГО СОТРУДНИЧЕСТВА В СФЕРЕ ЭЛЕКТРОНИКИ DOI: 10.22184/1992-4178.2022.220.9.54.56
ПОТЕНЦИАЛ И ПРИОРИТЕТЫ ИНДИЙСКО-РОССИЙСКОГО СОТРУДНИЧЕСТВА В СФЕРЕ ЭЛЕКТРОНИКИ DOI: 10.22184/1992-4178.2022.220.9.54.56
Event of Issue
Yu. Kovalevsky
PLENARY PART OF THE “MICROELECTRONICS 2022” RUSSIAN FORUM DOI: 10.22184/1992-4178.2022.220.9.38.46
PLENARY PART OF THE “MICROELECTRONICS 2022” RUSSIAN FORUM DOI: 10.22184/1992-4178.2022.220.9.38.46
Success Story
И. Рожков, А. Маурин
КОНТРОЛИРУЕМАЯ ЭВОЛЮЦИЯ: ОТ РУЧНОЙ ПАЙКИ ДО АВТОМАТИЗИРОВАННОГО МОНТАЖА КОМПОНЕНТОВ 0201 И BGA DOI: 10.22184/1992-4178.2022.220.9.58.64
КОНТРОЛИРУЕМАЯ ЭВОЛЮЦИЯ: ОТ РУЧНОЙ ПАЙКИ ДО АВТОМАТИЗИРОВАННОГО МОНТАЖА КОМПОНЕНТОВ 0201 И BGA DOI: 10.22184/1992-4178.2022.220.9.58.64
Economy & Business
M. Makushin
ASSESSMENT OF THE THIN-FILM PASSIVE COMPONENTS MARKET DOI: 10.22184/1992-4178.2022.220.9.66.72
The driving forces behind the development of the thin-film passive market include the expansion of electric vehicles and hybrid electric vehicles, the increase in demand for portable consumer electronics, mobile medical equipment, the deployment of 5G networks / communications, energy efficiency requirements for industrial equipment, etc.
ASSESSMENT OF THE THIN-FILM PASSIVE COMPONENTS MARKET DOI: 10.22184/1992-4178.2022.220.9.66.72
The driving forces behind the development of the thin-film passive market include the expansion of electric vehicles and hybrid electric vehicles, the increase in demand for portable consumer electronics, mobile medical equipment, the deployment of 5G networks / communications, energy efficiency requirements for industrial equipment, etc.
Tags: inductors integrated passive components resistors thin-film capacitors индукторы интегрированные пассивные компоненты резисторы тонкопленочные конденсаторы
Manufacturing equipment and process materials
A. Naumov, V. Ryazantsev
POLYSILICON AND QUARTZ GLOBAL MARKETS AT THE PRESENT STAGE AND PROSPECTS FOR THE INTEGRATED PRODUCTION OF THESE MATERIALS IN RUSSIA DOI: 10.22184/1992-4178.2022.220.9.122.133
The problems of creating polycrystalline silicon and high-purity synthetic quartz glass can be solved within one project. The article is written based on the materials of the authors’ report at the “Electronic components and microelectronic modules” scientific conference of “Microelectronics 2022” Russian Forum.
POLYSILICON AND QUARTZ GLOBAL MARKETS AT THE PRESENT STAGE AND PROSPECTS FOR THE INTEGRATED PRODUCTION OF THESE MATERIALS IN RUSSIA DOI: 10.22184/1992-4178.2022.220.9.122.133
The problems of creating polycrystalline silicon and high-purity synthetic quartz glass can be solved within one project. The article is written based on the materials of the authors’ report at the “Electronic components and microelectronic modules” scientific conference of “Microelectronics 2022” Russian Forum.
Engineering solutions
Sh. Shugaepov, E. Ermolaev, V. Egoshin, S. Dorofeeva
METAL-CERAMIC PACKAGES FOR SAW FILTERS FROM ZPP JSC DOI: 10.22184/1992-4178.2022.220.9.78.81
The article considers the metal-ceramic packages for SAW filters from Plant of Semiconductor Devices JSC (ZPP JSC). Information on the features and characteristics of these packages is given.
METAL-CERAMIC PACKAGES FOR SAW FILTERS FROM ZPP JSC DOI: 10.22184/1992-4178.2022.220.9.78.81
The article considers the metal-ceramic packages for SAW filters from Plant of Semiconductor Devices JSC (ZPP JSC). Information on the features and characteristics of these packages is given.
A. Abramov, Yu. Bobrova
PRINTED CIRCUIT BOARDS WITH BUILT-IN HEAT SINK BASED ON PYROLYTIC GRAPHITE SHEETS DOI: 10.22184/1992-4178.2022.220.9.82.88
The article discusses in detail the results of studies of the main thermal and mechanical properties of a promising material for the electronics industry namely pyrolytic graphite sheets. Technological solutions are given that allow to ensure the removal of heat from the components during their installation to multilayer PCB.
PRINTED CIRCUIT BOARDS WITH BUILT-IN HEAT SINK BASED ON PYROLYTIC GRAPHITE SHEETS DOI: 10.22184/1992-4178.2022.220.9.82.88
The article discusses in detail the results of studies of the main thermal and mechanical properties of a promising material for the electronics industry namely pyrolytic graphite sheets. Technological solutions are given that allow to ensure the removal of heat from the components during their installation to multilayer PCB.
Tags: heat dissipation internal installation of electronic components printed circuit board pyrolytic graphite sheets внутренний монтаж компонентов листовой пирографит отведение тепла печатная плата
Test & Measurements
S. Belov
DEEPENING SELF-MONITORING OF TEST AND VERIFICATION EQUIPMENT FOR CONTROL SYSTEMS: USER SHELL PARAMETERS DOI: 10.22184/1992-4178.2022.220.9.108.111
The article describes the upgrading so-called test and verification equipment software shell, that is a program that prevents actions that change the parameters of the test and verification equipment operating system. Upgrading is a series of solutions that allow to achieve the maximum limitation of the operator in the possibilities of using the test and verification equipment, making it almost impossible to go beyond the specifications both accidentally and intentionally.
DEEPENING SELF-MONITORING OF TEST AND VERIFICATION EQUIPMENT FOR CONTROL SYSTEMS: USER SHELL PARAMETERS DOI: 10.22184/1992-4178.2022.220.9.108.111
The article describes the upgrading so-called test and verification equipment software shell, that is a program that prevents actions that change the parameters of the test and verification equipment operating system. Upgrading is a series of solutions that allow to achieve the maximum limitation of the operator in the possibilities of using the test and verification equipment, making it almost impossible to go beyond the specifications both accidentally and intentionally.
Tags: information security integrity operating system protection tampering test test and verification equipment test and verification equipment self-monitoring user shell защита операционной системы информационная безопасность контрольно-проверочная аппаратура несанкционированное вмешательство оболочка пользователя самоконтроль кпа тест целостность
Radio engineering systems
А. Chernenko
ESTIMATION OF ERRORS IN THE DIFFERENCE OF CORRELATED NAVIGATION MEASUREMENTS DOI: 10.22184/1992-4178.2022.220.9.102.106
The article proposes a formula for estimating the errors of the difference between correlated measurements of navigation parameters, which allows to increase the efficiency of solving navigation problems, and presents the results of its experimental verification.
ESTIMATION OF ERRORS IN THE DIFFERENCE OF CORRELATED NAVIGATION MEASUREMENTS DOI: 10.22184/1992-4178.2022.220.9.102.106
The article proposes a formula for estimating the errors of the difference between correlated measurements of navigation parameters, which allows to increase the efficiency of solving navigation problems, and presents the results of its experimental verification.
Tags: correlated measurement error navigation parameters radar satellite navigation systems навигационные параметры погрешность коррелированных измерений рлс спутниковые навигационные системы
Microwave electronics
V. Kochemasov, A. Safin, S. Dinges
ANTENNA SWITCHES. PART 3 DOI: 10.22184/1992-4178.2022.220.9.90.96
The article considers the antenna switches. Information is provided on the features and characteristics of gallium nitride SPDT switches produced by a number of manufacturers.
ANTENNA SWITCHES. PART 3 DOI: 10.22184/1992-4178.2022.220.9.90.96
The article considers the antenna switches. Information is provided on the features and characteristics of gallium nitride SPDT switches produced by a number of manufacturers.
A. Tishchenko, A. Myasnikov, A. Zorkin, O. Tishchenko, E. Gorbunova
SELECTION AND SUBSTANTIATION OF THE CORE MATERIAL FOR THE SECONDARY-EMISSION CATHODE OF HIGH-POWER MICROWAVE M-TYPE ELECTROVACUUM DEVICES DOI: 10.22184/1992-4178.2022.220.9.98.100
Based on the results of the studies, it was proposed to use NV 7 niobium-tungsten alloy, which has thermomechanical strength, dimensional stability and thermal conductivity, as a material for manufacturing the core of the secondary-emission cathode of a powerful electrovacuum devices.
SELECTION AND SUBSTANTIATION OF THE CORE MATERIAL FOR THE SECONDARY-EMISSION CATHODE OF HIGH-POWER MICROWAVE M-TYPE ELECTROVACUUM DEVICES DOI: 10.22184/1992-4178.2022.220.9.98.100
Based on the results of the studies, it was proposed to use NV 7 niobium-tungsten alloy, which has thermomechanical strength, dimensional stability and thermal conductivity, as a material for manufacturing the core of the secondary-emission cathode of a powerful electrovacuum devices.
Tags: microwave m-type electrovacuum device nv 7 niobium-tungsten alloy secondary emission cathode core thermal conductivity керн вторично-эмиссионного катода сплав ниобия с вольфрамом нв 7 теплопроводность эвп свч м-типа
Reliability and tests
R. Malyshev, A. Puzanov
OVERVIEW OF TECHNOLOGIES FOR PROBING OF CRYSTALS ON A WAFER DOI: 10.22184/1992-4178.2022.220.9.114.118
The problem of early defect detection could be solved by interoperational control in production, including using the method of wafer probing. The article presents an overview of Russian technologies and methods for probing of crystals on a wafer.
OVERVIEW OF TECHNOLOGIES FOR PROBING OF CRYSTALS ON A WAFER DOI: 10.22184/1992-4178.2022.220.9.114.118
The problem of early defect detection could be solved by interoperational control in production, including using the method of wafer probing. The article presents an overview of Russian technologies and methods for probing of crystals on a wafer.
Tags: blade card cantilever probe card ceramic blade probe card probing vertical probe card блейд-карта вертикальная зондовая карта зондовая плата зондовый контроль кантилеверная зондовая карта керамическое лезвие
for Engineers
Digital economy
O. Kniga, A. Makarova
TRACEABILITY SYSTEMS AND METHODS FOR TAGGING ELECTRONIC COMPONENTS IN RUSSIA DOI: 10.22184/1992-4178.2022.220.9.134.146
The Ministry of Industry and Trade of Russia plans to introduce mandatory tagging of electronic components in 2023 in order to simplify the tracking of electronic products and combat counterfeiting. The article provides an overview of existing and prospective traceability systems, methods and equipment for tagging electronic components, which are planned to be introduced in the Russian Federation.
TRACEABILITY SYSTEMS AND METHODS FOR TAGGING ELECTRONIC COMPONENTS IN RUSSIA DOI: 10.22184/1992-4178.2022.220.9.134.146
The Ministry of Industry and Trade of Russia plans to introduce mandatory tagging of electronic components in 2023 in order to simplify the tracking of electronic products and combat counterfeiting. The article provides an overview of existing and prospective traceability systems, methods and equipment for tagging electronic components, which are planned to be introduced in the Russian Federation.
Tags: barcode data matrix code dot marking electrochemical marking laser marking rfid tag rfid-метка tagging traceability system код data matrix лазерная маркировка маркировка система прослеживания ударно-точечная маркировка штрихкод электрохимическая маркировка
Electromechanical components
V. Ezhov
WEIPU SF SERIES UNIVERSAL INDUSTRIAL CONNECTORS DOI: 10.22184/1992-4178.2022.220.9.74.76
Weipu offers a wide range of reliable industrial connectors for a wide range of applications from industrial automation and robotics to test and communication equipment. The article provides an overview of SF series universal connectors and their key areas of application.
WEIPU SF SERIES UNIVERSAL INDUSTRIAL CONNECTORS DOI: 10.22184/1992-4178.2022.220.9.74.76
Weipu offers a wide range of reliable industrial connectors for a wide range of applications from industrial automation and robotics to test and communication equipment. The article provides an overview of SF series universal connectors and their key areas of application.